FIAT PUNTO (188) 1.9L 8V JTD 59kW/79HP EDC15

ECU BOSCH EDC15C6 · 80 CV (59 kW) · 1900 cc · Diesel sovralimentato

ECU-databaseFIAT › FIAT PUNTO (188) 1.9L 8V JTD 59kW/79HP EDC15

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 13 firmwareversies

Voertuiggegevens

MerkFIAT
ModelPUNTO (188)
Motor1.9L 8V JTD 59kW/79HP EDC15
Standaard vermogen80 CV / 59 kW
Cilinderinhoud1900 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC15C6
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Main injection start angle
  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter

Firmware-identificatoren (13)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810019551037352250 1.05.008 BOSCH EDC15C6
02810019551037351392 1.05.034 BOSCH EDC15C6
02810019551037352600 1.05.027 BOSCH EDC15C6
02810108461037362658 1.05.046 BOSCH EDC15C7
02810108461037362658 1.05.004 BOSCH EDC15C7
02810110981037367794 1.05.006 BOSCH EDC15C7
02810114261037367797 1.05.006 BOSCH EDC15C7
02810114941037371885 1.00.0111037371885 BOSCH EDC15C7
02810114941037369126 1.05.009 BOSCH EDC15C7
02810114951037369125 1.05.005 BOSCH EDC15C7
02810114951037371887 1.05.004 BOSCH EDC15C7
02810114961037369123 1.05.005 BOSCH EDC15C7
02810114961037371888 1.05.008 BOSCH EDC15C7

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM PSOP 44 pins 29F400BT. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop