FIAT PANDA (319) 1.2L 8V 51kW/68HP IAW9GF

ECU MARELLI 9GF · 69 CV (51 kW) · 1200 cc · Benzina aspirato

ECU-databaseFIAT › FIAT PANDA (319) 1.2L 8V 51kW/68HP IAW9GF

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 24 firmwareversies

Voertuiggegevens

MerkFIAT
ModelPANDA (319)
Motor1.2L 8V 51kW/68HP IAW9GF
Standaard vermogen69 CV / 51 kW
Cilinderinhoud1200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantMARELLI
Model9GF
Geheugen / EPROMMicro BGA ST SPC564A7 - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Base timing - CNG
  • Base timing - E100
  • Base timing - E22
  • Minimum advance allowed
  • Minimum advance allowed - CNG
  • Minimum advance allowed - E100
  • Minimum advance allowed - E22
  • Minimum advance allowed protection
  • Minimum advance allowed protection - CNG
  • Optimal spark timing/MBT
  • Optimal spark timing/MBT correction
  • Optimal spark timing/MBT correction - CNG
  • Optimal spark timing/MBT correction - E100
  • Optimal spark timing/MBT correction - E22
  • Optimal spark timing/MBT - CNG
  • Spark advance correction for ECT sensor
  • Spark advance correction for ECT sensor - CNG
  • Base lambda - cold
  • Base Lambda - hot
  • Base Lambda - hot - CNG
  • Electronic throttle control
  • Average power effective limitation
  • Average torque effective limitation
  • Engine idle vs. ECT sensor
  • Maximum indicated torque
  • Max torque profile
  • Maximum vehicle acceleration
  • Torque management in Normal mode
  • Torque management Sport mode
  • Power Control in Normal mode
  • Power Control in Sport mode
  • Power limit torque table
  • Resistant torque table
  • Torque limit table for ECT sensor
  • Take-off torque law in Normal mode
  • Take-off torque law in Normal mode with power control
  • Take-off torque law in Sport mode
  • Take-off torque law in Sport mode with power control

Firmware-identificatoren (24)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
MM9GFHW0006M01PGBG 1.00.009 MARELLI 9GF
MM9GFHW0006L13PGAP 1.00.007 MARELLI 9GF
MM9GFHW0006M20PGDI 1.00.014 MARELLI 9GF
MM9GFHW0006Q41PGDP 1.00.013 MARELLI 9GF
MM9GFHW0006M01PLBS 1.00.005 MARELLI 9GF
MM9GFHW0006G00_LCT 1.00.006 MARELLI 9GF
MM9GFHW0006M01PGBS 1.00.015 MARELLI 9GF
MM9GFHW0006M01PGBT 1.00.004 MARELLI 9GF
MM9GFHW0006F05_LCI 1.00.008 MARELLI 9GF
MM9GFHW0034L13_P32 1.00.013 MARELLI 9GF
MM9GFHW0034M10PVCQ 1.00.008 MARELLI 9GF
MM9GFHW0034E04_P24 1.00.010 MARELLI 9GF
MM9GFHW0034E03_P22 1.00.011 MARELLI 9GF
MM9GFHW0034Q32PVDF 1.00.007 MARELLI 9GF
MM9GFHW0034L13PUAN 1.00.015 MARELLI 9GF
MM9GFHW0034E04_P25 1.00.017 MARELLI 9GF
MM9GFHW0096S82PGFG 1.00.009 MARELLI 9GF
MM9GFHW0096S61PGES 1.00.004 MARELLI 9GF
MM9GFHW0505Q43PTDS 1.00.011 MARELLI 9GF
MM9GFHWN015N00PCCG 1.00.015 MARELLI 9GF
MM9GFHWN015Q31FADF 1.00.007 MARELLI 9GF
MM9GFHWN015Q31PADF 1.00.016 MARELLI 9GF
MM9GFHWN015Q43PRDR 1.00.011 MARELLI 9GF
MM9GFHWN015Q43FMDR 1.00.009 MARELLI 9GF

Technische voertuignotities

OBD is located on the right side of the driver near the battery
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor BGA SPC564A70 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop