FIAT PALIO 1.0L 8V 40kW/53HP IAW1G7/49F

ECU MARELLI 1G7 SD.11 · 54 CV (4 kW) · 1000 cc · Benzina aspirato

ECU-databaseFIAT › FIAT PALIO 1.0L 8V 40kW/53HP IAW1G7/49F

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkFIAT
ModelPALIO
Motor1.0L 8V 40kW/53HP IAW1G7/49F
Standaard vermogen54 CV / 4 kW
Cilinderinhoud1000 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantMARELLI
Model1G7 SD.11
Geheugen / EPROM27C512 DIL28/PLCC32 512Kbit - Eprom 64K x 8

Beschikbare tuning-opties:

  • Advance at idle speed
  • Advance at part load
  • Lambda correction
  • Injection at part load
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.00.006 MARELLI 1G7 SD.11
1.00.001 MARELLI 1G7 SP.73 (18F)
1.00.008 MARELLI 1G7 SP.73 (18F)
1.00.002 MARELLI G7

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM 27C512 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters.
Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. In the ADVANCE maps, each 10 numbers is about 1 degree. On this epron can be set a KEY.