FIAT DUCATO year 2015 2.2L 16V BlueHDi 103kW/138HP DCM7.1B

ECU DELPHI DCM7.1B · 140 CV (103 kW) · 2200 cc · Diesel sovralimentato

ECU-databaseFIAT › FIAT DUCATO year 2015 2.2L 16V BlueHDi 103kW/138HP DCM7.1B

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 7 firmwareversies

Voertuiggegevens

MerkFIAT
ModelDUCATO year 2015
Motor2.2L 16V BlueHDi 103kW/138HP DCM7.1B
Standaard vermogen140 CV / 103 kW
Cilinderinhoud2200 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantDELPHI
ModelDCM7.1B
Geheugen / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848Kbyte

Beschikbare tuning-opties:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Load / throttle position reference 3
  • Max exhaust gas temperature curve for full load
  • Injection period
  • Injection period 10
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection period 9
  • Injection opening time related to inj. pressure
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Injection 5
  • Injection 6
  • Injection 7
  • Torque limiter
  • Torque limiter for diagnostic
  • Torque limiter for smoke limitation
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum indicated virtual torque 2
  • Maximum engine power
  • Throttle air mass flow calculation
  • Throttle air mass flow calculation 2
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Max torque profile for IAT sensor
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 5
  • Specific injection pressure 6
  • Specific injection pressure 7
  • Specific pressure injection after starting 2
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request from MAP sensor - interpolation
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for EFT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor
  • Take-off torque law from MAP sensor

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
98246011809839383580 1.00.0239697230680 DELPHI DCM7.1B
98246011809824601180 1.00.0089698260780 DELPHI DCM7.1B
98246011809824601180 1.00.0049696660780 DELPHI DCM7.1B
98246011809839383580 1.00.0179696493480 DELPHI DCM7.1B
98246011809824601180 1.00.0099699190780 DELPHI DCM7.1B
98246011809839383580 1.00.0019696830680 DELPHI DCM7.1B
98246011809839383580 1.00.0139696337980 DELPHI DCM7.1B

ECU-notities

Microprocessor TC297TP_96 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata