Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 6 firmwareversies
Voertuiggegevens
| Merk | FIAT |
| Model | DUCATO year 2011 |
| Motor | 2.3L 16V MJET II 82kW/110HP MJD8F3 |
| Standaard vermogen | 111 CV / 82 kW |
| Cilinderinhoud | 2300 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | MARELLI |
| Model | MJD8F3 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Engine efficiency
- EGR valve control
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda value of the smoke limitation
- Max torque profile
- Max torque profile - AT
- Max torque profile - MT
- Specific injection pressure limiter for EFT sensor
- Rail pressure threshold for torque limitation
- Specific injection pressure
- Air mass flow
- RPM step reference
- Driver torque request
- Driver torque request Sport mode
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle - steady state
- Variable geometry duty cycle - transient state
Firmware-identificatoren (6)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| MJ8F3HW00D | 1942B841 |
1.01.004 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 2841BL65 |
1.01.002 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3042BT04 |
1.01.006 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3042BS04 |
1.01.010 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3045BT08 |
1.01.003 | — |
MARELLI MJD8F3 |
| MJ8F3HW10W | 3042BV04 |
1.01.004 | — |
MARELLI MJD8F3 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Microprocessor FMPC 5565 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
