Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 7 firmwareversies
Voertuiggegevens
| Merk | FIAT |
| Model | DOBLO Mk2 |
| Motor | 1.3L 16V MJET 70kW/94HP MJ8DF/8F2 |
| Standaard vermogen | 95 CV / 7 kW |
| Cilinderinhoud | 1300 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | MARELLI |
| Model | MJD8F2 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Engine efficiency
- EGR valve control
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- L
- Torque limiter
- Lambda value of the smoke limitation
- Max torque profile
- Rail pressure threshold for torque limitation
- Specific injection pressure
- Air mass flow
- RPM step reference
- Driver torque request
- Driver torque request Sport mode
- Torque limiter for EFT sensor
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle - steady state
- Variable geometry duty cycle - transient state
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| MJ8DFHW00P | 9743D185 |
1.01.020 | — |
MARELLI MJD8F2 |
| MJ8DFHW00P | 9743D285 |
1.01.006 | — |
MARELLI MJD8F2 |
| MJ8F3HW10C | 1743Q321 |
1.01.010 | — |
MARELLI MJD8F3 |
| MJ8F3HW1FL | 304AD810 |
1.01.014 | — |
MARELLI MJD8F3 |
| MJ8F3HW1FL | 304AD910 |
1.01.004 | — |
MARELLI MJD8F3 |
| MJ8F3HW1FP | 1941D320 |
1.01.020 | — |
MARELLI MJD8F3 |
| MJ8F3HW2FP | 304AD410 |
1.01.004 | — |
MARELLI MJD8F3 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Microprocessor FMPC 5565 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
