FIAT DOBLO Mk1 1.3L 16V MJET 55kW/74HP MJD6F3

ECU MARELLI MJD6F3 · 75 pk (55 kW) · 1300 cc · Diesel sovralimentato

Firmware-identificatoren: 3058D448, MJD6F3HW03R, 3056D446, 3454D466, 3546H980, MJD6F3HW04P, 3549H196, 3554D492, MJD6F3HW04X, 33554D49

ECU-database › FIAT › FIAT DOBLO Mk1 1.3L 16V MJET 55kW/74HP MJD6F3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 7 firmwareversies

Wat je voor dit voertuig kunt bestellen

Origineel ECU-bestand MARELLI MJD6F3

30 credits

Het standaardbestand voor deze ECU.

Registreer gratis en bestel

Stage 1-bestand

vanaf 100 credits

Levering binnen 1-2 uur (tijdens werkuren). Levenslange garantie op het bestand.

Registreer gratis en bestel

Uitschakelingen en opties

Voeg ze toe aan het bestand of bestel ze los.

→ Bekijk de volledige prijslijst

Registreer gratis en bestel

Zo bestel je: gratis registratie, upload het originele bestand dat uit de ECU is gelezen en kies de dienst. 1 credit = € 1.

Heb je slaves of verkoop je ook bestanden door?Open je eigen file service-portaal onder je eigen merk Ontdek TuningFile →

Voertuiggegevens

MerkFIAT
ModelDOBLO Mk1
Motor1.3L 16V MJET 55kW/74HP MJD6F3
Standaard vermogen75 pk / 55 kW
Cilinderinhoud1300 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantMARELLI
ModelMJD6F3
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Boost pressure
  • EGR valve control
  • Gearbox maximum torque allowed
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Lambda value of the smoke limitation
  • Specific injection pressure limiter
  • Specific injection pressure
  • RPM step reference
  • Load STEP reference
  • Driver torque request
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
MJD6F3HW03R3058D448 1.00.014— MARELLI MJD6F3
MJD6F3HW03R3056D446 1.00.032— MARELLI MJD6F3
MJD6F3HW03R3454D466 1.00.025— MARELLI MJD6F3
MJD6F3HW04P3546H980 1.00.005— MARELLI MJD6F3
MJD6F3HW04P3549H196 1.00.007— MARELLI MJD6F3
MJD6F3HW04X3554D492 1.00.017— MARELLI MJD6F3
MJD6F3HW04X33554D49 1.00.009— MARELLI MJD6F3

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Original EPROM SPANSION S29CL016J PQFP 80 Pin To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
MICRO MPC563 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop

Verkrijg het bestand voor dit voertuig

Powered by TuningFile