FIAT 500 (312) 1.3L 16V MJET 55kW/74HP MJD6F3

ECU MARELLI MJD6F3 · 75 CV (55 kW) · 1300 cc · Diesel sovralimentato

ECU-databaseFIAT › FIAT 500 (312) 1.3L 16V MJET 55kW/74HP MJD6F3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 11 firmwareversies

Voertuiggegevens

MerkFIAT
Model500 (312)
Motor1.3L 16V MJET 55kW/74HP MJD6F3
Standaard vermogen75 CV / 55 kW
Cilinderinhoud1300 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantMARELLI
ModelMJD6F3
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • EGR valve control
  • Injection at part load
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Specific injection pressure limiter
  • Specific injection pressure
  • Specific air mass charge 2
  • Air mass flow
  • RPM step reference

Firmware-identificatoren (11)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.00.017 MARELLI MJD6F3
MJD6F3HW03P354AB598 1.00.002 MARELLI MJD6F3
MJD6F3HW03P3545B192 1.00.017 MARELLI MJD6F3
MJD6F3HW03P3545B595 1.00.006 MARELLI MJD6F3
MJD6F3HW04P3542B176 1.00.033 MARELLI MJD6F3
MJD6F3HW04P3545B595 1.00.019 MARELLI MJD6F3
MJD6F3HW04P3545B190 1.00.028 MARELLI MJD6F3
MJD6F3HW04P3548B596 1.00.014 MARELLI MJD6F3
MJD6F3HW04P3545B192 1.00.030 MARELLI MJD6F3
MJD6F3HW04P354AB598 1.00.018 MARELLI MJD6F3
MJD6F3HW04P3545B595 1.00.006 MARELLI MJD6F3

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata