CITROEN C3 Mk1 1.6L 16V HDI 68kW/91HP EDC16C34

ECU BOSCH EDC16C34 · 92 CV (68 kW) · 1600 cc · Diesel sovralimentato

ECU-databaseCITROEN › CITROEN C3 Mk1 1.6L 16V HDI 68kW/91HP EDC16C34

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 18 firmwareversies

Voertuiggegevens

MerkCITROEN
ModelC3 Mk1
Motor1.6L 16V HDI 68kW/91HP EDC16C34
Standaard vermogen92 CV / 68 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC16C34
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Boost pressure F (temperature)
  • EGR valve control
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 2
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Injection period in aftertreatment modes
  • Injection period in aftertreatment modes 2
  • Injection period in aftertreatment modes 3
  • Max injection limit
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Injection in aftertreatment modes 2
  • Injection in aftertreatment modes 3
  • Torque limiter 2
  • Torque limiter
  • Lambda value of the smoke limitation
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Air mass flow
  • Driver torque request
  • Driver torque request 2
  • Driver torque request for high speed - AT
  • Driver torque request for low speed - AT
  • Driver torque request for reverse gear
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear - AT
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Take-off torque law in Normal mode
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit in regeneration mode
  • Variable geometry duty cycle limit in regeneration mode 2

Firmware-identificatoren (18)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.67.0121037380737 BOSCH EDC16C34
1.67.0101037393460 BOSCH EDC16C34
1.67.0161037398246 BOSCH EDC16C34
1.67.0131037375953 BOSCH EDC16C34
1.67.0241039398208 BOSCH EDC16C34
1.67.0101037398246 BOSCH EDC16C34
1.67.0141037386113 BOSCH EDC16C34
1.67.0021039398220 BOSCH EDC16C34
1.67.0131037380080 BOSCH EDC16C34
1.67.0401037386110 BOSCH EDC16C34
1.67.0231037374960 BOSCH EDC16C34
1.67.0141037376764 BOSCH EDC16C34
1.67.0161037375952 BOSCH EDC16C34
1.67.0191037395398 BOSCH EDC16C34
1.67.0051037375953 BOSCH EDC16C34
1.67.0171037380081 BOSCH EDC16C34
1.67.0191037380736 BOSCH EDC16C34
1.67.0191037398225 BOSCH EDC16C34

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):