CITROEN C2 1.6L 16V VTS 90kW/120HP ME7.4.5
ECU BOSCH ME7.4.5 · 122 CV (9 kW) · 1600 cc · Benzina aspirato
ECU-database ›
CITROEN › CITROEN C2 1.6L 16V VTS 90kW/120HP ME7.4.5
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
4 firmwareversies
Verkrijg het bestand voor dit voertuig
Voertuiggegevens
| Merk | CITROEN |
| Model | C2 |
| Motor | 1.6L 16V VTS 90kW/120HP ME7.4.5 |
| Standaard vermogen | 122 CV / 9 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | ME7.4.5 |
| Geheugen / EPROM | MICRO ST - 6656 Kbit |
Beschikbare tuning-opties:
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Exhaust gas temperature
- Torque limiter for diagnostic
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- RPM Limiter 2
- RPM limit for EOT sensor
- Lambda driver wish
- Knock detection factor
- Throttle air mass flow calculation
- Optimal engine moment
- Offset tolerance depending on permissible torque
- Offset tolerance depending on permissible torque 2
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation 2
- Driver torque request
- Throttle angle management
Firmware-identificatoren (4)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| 0261208907 | 1037384420 | 1.88.014 | 9663990380 | BOSCH ME7.4.5 |
| 0261208907 | 1037395187 | 1.88.015 | 9665989080 | BOSCH ME7.4.5 |
| 0261208907 | 1037376344 | 1.88.013 | 9657712480 | BOSCH ME7.4.5 |
| 0261208907 | 1037379167 | 1.88.022 | 9662227480 | BOSCH ME7.4.5 |
Technische voertuignotities
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
Microprocessor ST10F275 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.
