CF MOTO 450 CL-C 24->25 33kW
ECU BOSCH MSE6.0 · 44 CV (33 kW) · 450 cc · Benzina aspirato
ECU-database ›
CF MOTO › CF MOTO 450 CL-C 24->25 33kW
Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
2 firmwareversies
Verkrijg het bestand voor dit voertuig
Voertuiggegevens
| Merk | CF MOTO |
| Model | 450 CL-C |
| Motor | 24->25 33kW |
| Standaard vermogen | 44 CV / 33 kW |
| Cilinderinhoud | 450 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Moto |
ECU
| Fabrikant | BOSCH |
| Model | MSE6.0 |
| Geheugen / EPROM | Micro BGA ST SPC563M64 - 12288 Kbit - 180000 |
Beschikbare tuning-opties:
- Base timing
- Lambda/AFR full load/WOT
- Lambda/AFR mixture at part load
- Lambda/AFR mixture for engine temperature at crancking
- Spark advance correction for ECT sensor
- Desired engine load calculation
- Exhaust gas temperature
- Weighting map cold-start
- Weighting map cold-start 2
- Engine idle vs. ECT sensor
- Engine idle vs. EOT sensor
- Injection correction for ECT sensor
- Lambda enrichment for components protection
- RPM Limiter
- RPM Limiter 2
- Speed limiter
- MAP - limp home mode
- Throttle air mass flow calculation
- Throttle angle limitation
- Throttle angle management
- Volumetric efficiency
Firmware-identificatoren (2)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|---|---|---|---|
| — | X10H04A643 | 1.88.010 | F01R00DF8G | BOSCH MSE6.0 |
| — | X10H04A647 | 1.88.005 | F01R00DF8G | BOSCH MSE6.0 |
ECU-notities
Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
