Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 8 firmwareversies
Voertuiggegevens
| Merk | AUDI |
| Model | TT (8N) |
| Motor | 1.8L 20V TURBO 110KW/148HP ME7.5 |
| Standaard vermogen | 150 CV / 11 kW |
| Cilinderinhoud | 1800 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | ME7.5 |
| Geheugen / EPROM | 29F800 PSOP44 8Mbit - Flash 512K x 16 |
Beschikbare tuning-opties:
- Base timing
- Optimal spark timing/MBT
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Boost pressure limiter 4
- Boost pressure limiter 5
- Boost pressure
- Desired engine load calculation
- Injection at part load
- Lambda enrichment for components protection
- Lambda driver wish
- Knock detection factor
- Throttle air mass flow calculation
- Optimal engine moment
- P
- Max boost pressure control
- Driver torque request
- Throttle angle management
Firmware-identificatoren (8)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 0261201200 | 1037377678 |
1.42.007 | 8N0906018CT 0010 |
BOSCH ME7.5 |
| 0261201201 | 1037377669 |
1.42.010 | 8N0906018DA 0010 |
BOSCH ME7.5 |
| 0261207324 | 1037360281 |
1.21.018 | 8N0906018AK 0001 |
BOSCH ME7.5 |
| 0261207420 | 1037369397 |
1.42.024 | 8N0906018AP 0003 |
BOSCH ME7.5 |
| 0261207420 | 1037366423 |
1.42.013 | 8N0906018AP 0002 |
BOSCH ME7.5 |
| 0261207420 | 1037360847 |
1.21.020 | 8N0906018AP 0001 |
BOSCH ME7.5 |
| 0261208085 | 1037366846 |
1.42.011 | 8N0906018CC 0002 |
BOSCH ME7.5 |
| 0261208633 | 1037369772 |
1.42.017 | 8N0906018CN 0010 |
BOSCH ME7.5 |
Technische voertuignotities
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU-notities
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
