AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1.1

ECU BOSCH ME7.1.1 · 250 CV (184 kW) · 2700 cc · Benzina sovralimentato

ECU-databaseAUDI › AUDI ALLROAD A4/A6 2.7L BITURBO 184kW/247HP ME7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkAUDI
ModelALLROAD A4/A6
Motor2.7L BITURBO 184kW/247HP ME7.1.1
Standaard vermogen250 CV / 184 kW
Cilinderinhoud2700 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Boost pressure limiter
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Constant pressure control
  • Max boost pressure control
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612077661037366367 1.42.0124Z7907551N 0003 BOSCH ME7.1.1
02612077671037366368 1.42.0084Z7907551P 0003 BOSCH ME7.1.1
02612082881037368391 1.42.0134Z7907551S 0020 BOSCH ME7.1.1
02612084841037369096 1.42.0074Z7907551T 0010 BOSCH ME7.1.1

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.