AUDI A6 (C7/4G) 2.0L 16V TDI 110kW/148HP EDC17C64

ECU BOSCH EDC17C64 · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseAUDI › AUDI A6 (C7/4G) 2.0L 16V TDI 110kW/148HP EDC17C64

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 22 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA6 (C7/4G)
Motor2.0L 16V TDI 110kW/148HP EDC17C64
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC17C64
Geheugen / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost limiter correction for APS/BPS sensor
  • Protection for cylinder head overheating
  • Engine load - ceiling
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Max accepted exhaust gas temperature value at particulate sensor
  • Protection for engine overheating
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Engine idle vs. ECT sensor 3
  • Engine idle vs. ECT sensor 4
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period - correction
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Injection 1
  • J
  • Injection 3
  • L
  • Boost pressure deviation limits for overboost detection
  • Boost pressure deviation limit for underboost detection
  • Boost pressure deviation limit for underboost detection 2
  • Torque limiter
  • Smoke limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Lambda value of the smoke limitation 4
  • Lambda value of the smoke limitation 5
  • Maximum indicated torque
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for fuel overheating
  • Protection for oil overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure limiter for EOT sensor
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Q
  • Specific air mass charge - correction
  • Specific air mass charge - correction 2
  • Driver torque request
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Overboost timing 3
  • Overboost timing 4
  • Turbocharger volumetric efficiency

Firmware-identificatoren (22)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.94.00504L906021CG 8511 BOSCH EDC17C64
1.94.01204L906021GT 4840 BOSCH EDC17C64
1.94.00604L906021AM 3502 BOSCH EDC17C64
1.94.00904L906021CF 8468 BOSCH EDC17C64
1.94.01604L906021BS 8465 BOSCH EDC17C64
1.94.02204L906021BC 0746 BOSCH EDC17C64
1.94.01204L906021AM 9971 BOSCH EDC17C64
1.94.02104L906021BC 9971 BOSCH EDC17C64
1.94.01404L906021BS 8252 BOSCH EDC17C64
1.94.01704L906021BT 8264 BOSCH EDC17C64
1.94.00804L906021CC 8257 BOSCH EDC17C64
1.94.00904L906021CF 8262 BOSCH EDC17C64
1.94.01304L906021CF 8348 BOSCH EDC17C64
1.94.00404L906021CG 8261 BOSCH EDC17C64
1.94.01404L906021CG 8349 BOSCH EDC17C64
1.94.00904L906021GT 3829 BOSCH EDC17C64
1.94.00604L906021AM 0744 BOSCH EDC17C64
1.94.00904L906021GS 3831 BOSCH EDC17C64
1.94.00304L906021GS 3979 BOSCH EDC17C64
1.94.00204L906021BC 9972 BOSCH EDC17C64
1.94.03404L906021AM 0656 BOSCH EDC17C64
1.94.01604L906021BC 0657 BOSCH EDC17C64

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata