AUDI A5 (8F/8T) 2.0L 16V TDI 120kW/161HP EDC17CP20

ECU BOSCH EDC17CP20 · 163 CV (12 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseAUDI › AUDI A5 (8F/8T) 2.0L 16V TDI 120kW/161HP EDC17CP20

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA5 (8F/8T)
Motor2.0L 16V TDI 120kW/161HP EDC17CP20
Standaard vermogen163 CV / 12 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC17CP20
Geheugen / EPROMSPANSION S29CD016

Beschikbare tuning-opties:

  • Smoke limiter 2
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Regeneration limit for DPF
  • EGR valve control
  • EGR valve control 2
  • EGR valve control 3
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • J
  • Injection 2
  • L
  • Torque limiter 2
  • Torque limiter
  • Torque limiter at high EGT
  • Smoke limiter
  • Speed limiter
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter 4
  • Relative permissible torque from the pedal position in torque limitation
  • Specific injection pressure
  • Driver torque request
  • Variable geometry duty cycle limit

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.00.01503L906022NR 8421 BOSCH EDC17CP20
1.00.01503L906022NR 5071 BOSCH EDC17CP20
1.94.02403L906022NR 6034 BOSCH EDC17CP20
1.94.01403L906022NR 5491 BOSCH EDC17CP20
1.94.01703L906022NR 9978 BOSCH EDC17CP20

ECU-notities

MICRO Infineon Tricore TC1796 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata