AUDI A3 (8L) 1.9L 8V TDI 66KW/89HP PLCC Motronic

ECU BOSCH MOTRONIC · 90 CV (66 kW) · 1900 cc · Diesel sovralimentato

ECU-databaseAUDI › AUDI A3 (8L) 1.9L 8V TDI 66KW/89HP PLCC Motronic

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 10 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA3 (8L)
Motor1.9L 8V TDI 66KW/89HP PLCC Motronic
Standaard vermogen90 CV / 66 kW
Cilinderinhoud1900 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMOTRONIC
Geheugen / EPROM27C020 DIL32/PLCC32 2Mbit - Eprom 256K x 8

Beschikbare tuning-opties:

  • Injection for boost pressure sensor 1
  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810014101037355827/828 16 bit 1.01.015 BOSCH MOTRONIC
02810016931037357791/792 16 bit 1.01.011 BOSCH MOTRONIC
02810016931037357319/320 16 bit 1.01.013 BOSCH MOTRONIC
0281001728103735 16 bit 1.01.018 BOSCH MOTRONIC
02810017571037358252/253 16 bit 1.01.013 BOSCH MOTRONIC
02810018471037359496/497 16 bit 1.01.010 BOSCH MOTRONIC
028100184810373XXXXX/X 16 bit 1.01.006 BOSCH MOTRONIC
02810018521037359690/1 16 bit 1.01.013 BOSCH MOTRONIC
02810018521037359223/4 16 bit 1.00.013 BOSCH MOTRONIC
02810102421037352609/610 16 bit 1.01.012 BOSCH MOTRONIC

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

2 original EPROM 27C010 or 29F010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.
2 original EPROM 27C010 PLCC 32 pins. To read this EPROM with the EMP20/21 programmer you need PD32 adapters. 16 Bit setting file. This works with a file obtained with the merge of EPROM HHH + LLL. On this epron can be set a KEY.