AUDI A3 (8L) 1.8L 20V 92KW/123HP PSOP Motronic

ECU BOSCH MOTRONIC 3.83 · 125 CV (92 kW) · 1800 cc · Benzina aspirato

ECU-databaseAUDI › AUDI A3 (8L) 1.8L 20V 92KW/123HP PSOP Motronic

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkAUDI
ModelA3 (8L)
Motor1.8L 20V 92KW/123HP PSOP Motronic
Standaard vermogen125 CV / 92 kW
Cilinderinhoud1800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMOTRONIC 3.83
Geheugen / EPROM28F200 PSOP44 2Mbit - Flash 128K x16 (256K x 8)

Beschikbare tuning-opties:

  • Advance at idle speed
  • Advance at part load
  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Speed / RPM limiter
  • Air mass flow

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612060781037359101 1.33.008 BOSCH MOTRONIC 3.83
02612045901037352139 1.33.003 BOSCH MOTRONIC M3.8.3 DAMOS 37R
02612046751037358125 1.33.004 BOSCH MOTRONIC M3.8.3 DAMOS 37R
02612049931037350728 1.33.010 BOSCH MOTRONIC M3.8.3 DAMOS 37R
02612061271037356641 1.33.010 BOSCH MOTRONIC M3.8.3 DAMOS 37R

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F200. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.