Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
2 firmwareversies
Voertuiggegevens
| Merk | ALFA ROMEO |
| Model | 156 Mk1 |
| Motor | 2.0L 16V TS 110kW/148HP ME3.1 |
| Standaard vermogen | 150 CV / 11 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Benzina aspirato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | ME3.1 / ME7.3H4 |
| Geheugen / EPROM | HYBRID ECU - 4.096Kbit 0x80000 |
Beschikbare tuning-opties:
- Advance at idle speed
- Advance at part load
- Advance full load
- Injection at part load
- Injection at full throttle
Firmware-identificatoren (2)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 0261204949 | 1277356340 |
1.44.007 | — |
BOSCH ME3.1 / ME7.3H4 |
| 0261204949 | 1277356500 |
1.44.014 | — |
BOSCH ME3.1 / ME7.3H4 |
Technische voertuignotities
ECU located on or behind the engine block. It may be necessary to remove the engine cover. Difficulty: easy.
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. WARNING!! ECU ME7 - IX/CL = injection at full load, decrease the values to enrich the injection Note for the SELESPEED version: before disconnecting the ECU make sure that the gearbox is in idle position to avoid car blockage. In that case use the Examiner. If after a correct modification a fault code appears, simply turn on the engine and the fault will be reset automatically after some starts. This Setting File can be used for serial system : Genius or NewGenius.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
