YAMAHA MOTORCYCLES T-MAX 560 25->25 35kW

ECU DENSO Bxx-8591A-xx · 48 CV (35 kW) · 562 cc · Benzina aspirato

ECU duomenų bazėYAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES T-MAX 560 25->25 35kW

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 7 programinės įrangos versijos

Transporto priemonės duomenys

MarkėYAMAHA MOTORCYCLES
ModelisT-MAX 560
Variklis25->25 35kW
Serijinė galia48 CV / 35 kW
Darbinis tūris562 cc
KurasBenzina aspirato
Transporto priemonės tipasMoto

ECU

GamintojasDENSO
ModelisBxx-8591A-xx
Atmintis / EPROMMicro RENESAS core RH850

Galimos derinimo operacijos / parinktys:

  • AFR full load/WOT
  • AFR for IAP
  • AFR for TPS
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Allowed speed difference between axles - set A
  • Allowed speed difference between axles - set B
  • Allowed speed difference between axles - set C
  • Coil charge time
  • Engine brake
  • Engine idle vs. ECT sensor
  • Rpm threshold fuel cut
  • Rpm threshold fuel cut 2
  • Injection for IAP
  • Injection for TPS
  • RPM Limiter
  • Speed limiter
  • Optimal engine moment
  • Optimal engine moment 2
  • Throttle angle management - mode 1
  • TAMM
  • Throttle angle management - mode 3
  • Throttle angle management - mode 4
  • Cooling fan activation

Programinės įrangos identifikatoriai (7)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
128E70C0 1.00.018BSW9_128E70C0 DENSO Bxx-8591A-xx
128E70B0 1.00.009BSW8_128E70B0 DENSO Bxx-8591A-xx
128E6000 1.00.019BSV1_128E6000 DENSO Bxx-8591A-xx
128E7040 1.00.007BSW6_128E7040 DENSO Bxx-8591A-xx
128E6080 1.00.004BSV2_128E6080 DENSO Bxx-8591A-xx
128E7000 1.00.036BSW1_128E7000 DENSO Bxx-8591A-xx
128E7080 1.00.010BSW3_128E7080 DENSO Bxx-8591A-xx

ECU pastabos

Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata