YAMAHA MOTORCYCLES MT-07 700 25->25 55kW

ECU DENSO Bxx-8591A-xx · 73 CV (54 kW) · 690 cc · Benzina aspirato

ECU duomenų bazėYAMAHA MOTORCYCLES › YAMAHA MOTORCYCLES MT-07 700 25->25 55kW

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 8 programinės įrangos versijos

Transporto priemonės duomenys

MarkėYAMAHA MOTORCYCLES
ModelisMT-07 700
Variklis25->25 55kW
Serijinė galia73 CV / 54 kW
Darbinis tūris690 cc
KurasBenzina aspirato
Transporto priemonės tipasMoto

ECU

GamintojasDENSO
ModelisBxx-8591A-xx
Atmintis / EPROMMicro RENESAS core RH850

Galimos derinimo operacijos / parinktys:

  • AFR full load/WOT
  • AFR for IAP
  • AFR for TPS
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Coil charge time
  • Engine idle vs. ECT sensor
  • Rpm threshold fuel cut
  • Rpm threshold fuel cut 2
  • Injection for IAP
  • Injection for TPS
  • RPM Limiter
  • Speed limiter
  • Optimal engine moment
  • Optimal engine moment 2
  • Throttle angle limitation
  • TAMCM
  • Throttle angle management - correction - mode 2
  • Throttle angle management - correction - mode 3
  • Throttle angle management - correction - mode 4
  • TAMM
  • Cooling fan activation
  • Engine torque limiter depending on vehicle speed

Programinės įrangos identifikatoriai (8)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
128D8000 1.00.013BSH1_128D8000 DENSO Bxx-8591A-xx
128DB000 1.00.016BSK1_128DB000 DENSO Bxx-8591A-xx
12A17000 1.00.007BXG1_12A17000 DENSO Bxx-8591A-xx
12727100 1.00.010BLW8_12727100 DENSO Bxx-8591A-xx
128DA000 1.00.012BSJ1_128DA000 DENSO Bxx-8591A-xx
12727140 1.00.010BLWC_12727140 DENSO Bxx-8591A-xx
12727040 1.00.012BLW2_12727040 DENSO Bxx-8591A-xx
12727000 1.00.015BLW1_12727000 DENSO Bxx-8591A-xx

ECU pastabos

Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor R7F701201 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata ATTENTION - 35kW reduced power version file.