VOLVO S80 Mk1 2.5L T5 TURBO 154kW/210HP ME7.0

ECU BOSCH ME7.0 · 210 CV (155 kW) · 2500 cc · Benzina sovralimentato

ECU duomenų bazėVOLVO › VOLVO S80 Mk1 2.5L T5 TURBO 154kW/210HP ME7.0

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO
ModelisS80 Mk1
Variklis2.5L T5 TURBO 154kW/210HP ME7.0
Serijinė galia210 CV / 155 kW
Darbinis tūris2500 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.0
Atmintis / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Galimos derinimo operacijos / parinktys:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612045591037359462 1.46.0152010mhde.a2l BOSCH ME7.0
02612045591037359462 1.46.00920S1HJ.a2 BOSCH ME7.0
02612045591037359462 1.46.00540GMHJ.a2l BOSCH ME7.0
02612045591037359462 1.46.00840GPHJ.a2l BOSCH ME7.0

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!