VOLVO S40 1.6L 16V D 80kW/109HP EDC16C34

ECU BOSCH EDC16C34 · 110 CV (81 kW) · 1600 cc · Diesel sovralimentato

ECU duomenų bazėVOLVO › VOLVO S40 1.6L 16V D 80kW/109HP EDC16C34

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 9 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO
ModelisS40
Variklis1.6L 16V D 80kW/109HP EDC16C34
Serijinė galia110 CV / 81 kW
Darbinis tūris1600 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisEDC16C34
Atmintis / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Galimos derinimo operacijos / parinktys:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure in aftertreatment modes
  • Boost pressure F (temperature)
  • EGR valve control
  • EGR valve control 2
  • Basic torque management at engine cranking
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • Injection period in aftertreatment modes
  • Injection period in aftertreatment modes 2
  • Injection period in aftertreatment modes 3
  • Max injection limit
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Injection in aftertreatment modes 2
  • Torque limiter 2
  • Torque limiter
  • Lambda value of the smoke limitation
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Air mass flow
  • Driver torque request
  • Driver torque request 2
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear - AT
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Variable geometry duty cycle limit in regeneration mode
  • Variable geometry duty cycle limit in regeneration mode 2

Programinės įrangos identifikatoriai (9)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
08692329 AV84A_M4_P1x_TC6ASQTP_31303772_FA 1.67.01631303772 AA BOSCH EDC16C34
08692329 AV84A_M3_P1x_ZC6ASQTP_31303774_FA 1.67.01231303774 AA BOSCH EDC16C34
08692329 AV83A_T5C6ASQTP_31219679_NB070626 1.67.01231219679 AA BOSCH EDC16C34
31211076 AAV84A_M4_P1x_TC6AUHTP_31303775_FA 1.67.02231303775 AA BOSCH EDC16C34
31211076 AAV83A_T5C6ASQTP_31219679_NB070626 1.67.01331219679 AA BOSCH EDC16C34
31211076 AAV84A_M4_P1x_TC6ASQTP_31303772_FA 1.67.00931303772 AA BOSCH EDC16C34
31211076 AAV84A_M3_P1x_ZC6ASQTP_31303774_FA 1.67.00431303774 AA BOSCH EDC16C34
31211076 AAV84A_M4_P1x_TC6ASQTP_30788843_CB 1.67.01430788843 AA BOSCH EDC16C34
31272996 ABV91c 109c P11 12 14 M FWD M06 1.67.01431321411 AE BOSCH EDC16C34

ECU pastabos

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata