VOLVO TRUCK FM MK II 380 12L 280kW/375HP LUCAS

ECU LUCAS PLCC 28HC256 · 380 CV (28 kW) · 12000 cc · Diesel sovralimentato

ECU duomenų bazėVOLVO TRUCK › VOLVO TRUCK FM MK II 380 12L 280kW/375HP LUCAS

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 15 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO TRUCK
ModelisFM MK II
Variklis380 12L 280kW/375HP LUCAS
Serijinė galia380 CV / 28 kW
Darbinis tūris12000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasTir

ECU

GamintojasLUCAS
ModelisPLCC 28HC256
Atmintis / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Galimos derinimo operacijos / parinktys:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Programinės įrangos identifikatoriai (15)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
03161952XXXX3180 1.55.004 LUCAS PLCC 28HC256
03161952XXXX3311 1.55.005 LUCAS PLCC 28HC256
03161962XXXX6998 1.55.003 LUCAS PLCC 28HC256
03161962XXXX9527 1.55.004 LUCAS PLCC 28HC256
03161962XXXX2069 1.55.110 LUCAS PLCC 28HC256
03161962XXXX4794 1.55.002 LUCAS PLCC 28HC256
08170700XXXX3217 1.55.003 LUCAS PLCC 28HC256
20412506XXXX3084 1.55.109 LUCAS PLCC 28HC256
20412506XXXX3296 1.55.004 LUCAS PLCC 28HC256
20412506XXXX3338 1.55.002 LUCAS PLCC 28HC256
20577131XXXX1482 1.55.109 LUCAS PLCC 28HC256
20577131XXXX6998 1.55.003 LUCAS PLCC 28HC256
20577131XXXX3070 1.55.002 LUCAS PLCC 28HC256
20582958XXXX4923 1.55.009 LUCAS PLCC 28HC256
20582958XXXX6998 1.55.006 LUCAS PLCC 28HC256

ECU pastabos

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.
Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.