VOLVO TRUCK FM MK II 340 12L 250kW/335HP LUCAS

ECU LUCAS PLCC 28HC256 · 340 CV (25 kW) · 12000 cc · Diesel sovralimentato

ECU duomenų bazėVOLVO TRUCK › VOLVO TRUCK FM MK II 340 12L 250kW/335HP LUCAS

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 13 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO TRUCK
ModelisFM MK II
Variklis340 12L 250kW/335HP LUCAS
Serijinė galia340 CV / 25 kW
Darbinis tūris12000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasTir

ECU

GamintojasLUCAS
ModelisPLCC 28HC256
Atmintis / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Galimos derinimo operacijos / parinktys:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Programinės įrangos identifikatoriai (13)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
03161952XXXX3218 1.55.008 LUCAS PLCC 28HC256
03161962XXXX3070 1.55.001 LUCAS PLCC 28HC256
03161962XXXX9531 1.55.005 LUCAS PLCC 28HC256
03161962XXXX6997 1.55.004 LUCAS PLCC 28HC256
03161962XXXX3296 1.55.110 LUCAS PLCC 28HC256
03161962XXXX2068 1.55.006 LUCAS PLCC 28HC256
03161962XXXX9624 1.55.107 LUCAS PLCC 28HC256
08170700XXXX3083 1.55.004 LUCAS PLCC 28HC256
20412506XXXX3237 1.55.007 LUCAS PLCC 28HC256
20412506XXXX3218 1.55.005 LUCAS PLCC 28HC256
20577131XXXX4922 1.55.004 LUCAS PLCC 28HC256
20577131XXXX0979 1.55.005 LUCAS PLCC 28HC256
20582958XXXX3237 1.55.003 LUCAS PLCC 28HC256

ECU pastabos

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.
Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius. On this epron can be set a KEY.
Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY.