VOLVO TRUCK FM MK I 300 9.4L 221kW/296HP LUCAS

ECU LUCAS PLCC 28HC256 · 300 CV (221 kW) · 9400 cc · Diesel sovralimentato

ECU duomenų bazėVOLVO TRUCK › VOLVO TRUCK FM MK I 300 9.4L 221kW/296HP LUCAS

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 10 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO TRUCK
ModelisFM MK I
Variklis300 9.4L 221kW/296HP LUCAS
Serijinė galia300 CV / 221 kW
Darbinis tūris9400 cc
KurasDiesel sovralimentato
Transporto priemonės tipasTir

ECU

GamintojasLUCAS
ModelisPLCC 28HC256
Atmintis / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Galimos derinimo operacijos / parinktys:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Programinės įrangos identifikatoriai (10)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
03161962XXXX2290 1.55.002 LUCAS PLCC 28HC256
03161962XXXX2291 1.55.004 LUCAS PLCC 28HC256
03161962XXXX4497 1.55.005 LUCAS PLCC 28HC256
03161962XXXX8747 1.55.011 LUCAS PLCC 28HC256
03161983XXXX1157 1.55.007 LUCAS PLCC 28HC256
03161983XXXX1030 1.55.008 LUCAS PLCC 28HC256
20577131XXXX6219 1.55.103 LUCAS PLCC 28HC256
20577131XXXX2291 1.55.111 LUCAS PLCC 28HC256
20577131XXXX9382 1.55.004 LUCAS PLCC 28HC256
20577135XXXX1191 1.55.003 LUCAS PLCC 28HC256

ECU pastabos

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.