VOLVO TRUCK FL MK I 240 7.2L 184kW/247HP LUCAS

ECU LUCAS PLCC 28HC256 · 250 CV (184 kW) · 7200 cc · Diesel sovralimentato

ECU duomenų bazėVOLVO TRUCK › VOLVO TRUCK FL MK I 240 7.2L 184kW/247HP LUCAS

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 17 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLVO TRUCK
ModelisFL MK I
Variklis240 7.2L 184kW/247HP LUCAS
Serijinė galia250 CV / 184 kW
Darbinis tūris7200 cc
KurasDiesel sovralimentato
Transporto priemonės tipasTir

ECU

GamintojasLUCAS
ModelisPLCC 28HC256
Atmintis / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Galimos derinimo operacijos / parinktys:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Programinės įrangos identifikatoriai (17)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
03161963XXXX3580 1.55.003 LUCAS PLCC 28HC256
03161965XXXX3076 1.55.003 LUCAS PLCC 28HC256
03161965XXXX1949 1.55.111 LUCAS PLCC 28HC256
03161965XXXX8864 1.55.001 LUCAS PLCC 28HC256
03161965XXXX1949 1.55.110 LUCAS PLCC 28HC256
03161965XXXX1481 1.55.004 LUCAS PLCC 28HC256
08192397XXXX0172 1.55.004 LUCAS PLCC 28HC256
08192397XXXX1949 1.55.003 LUCAS PLCC 28HC256
08192397XXXX1946 1.55.005 LUCAS PLCC 28HC256
08192397XXXX3672 1.55.002 LUCAS PLCC 28HC256
20412507XXXX3580 1.55.005 LUCAS PLCC 28HC256
20412508XXXX1949 1.55.116 LUCAS PLCC 28HC256
20412508XXXX3675 1.55.004 LUCAS PLCC 28HC256
20412508XXXX3672 1.55.002 LUCAS PLCC 28HC256
20577133XXXX3076 1.55.003 LUCAS PLCC 28HC256
20577133XXXX1949 1.55.002 LUCAS PLCC 28HC256
20577133XXXX8864 1.55.004 LUCAS PLCC 28HC256

ECU pastabos

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.