Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 14 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | VOLKSWAGEN |
| Modelis | TOUAREG (7L) |
| Variklis | 2.5L R5 TDI 128kW/172HP EDC16+ |
| Serijinė galia | 174 CV / 128 kW |
| Darbinis tūris | 2500 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16U31/U34/CP34 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Smoke limiter 2
- Main injection duration angle
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- Boost pressure in aftertreatment modes 2
- Boost pressure in aftertreatment modes 3
- EGR valve control
- EGR valve control in aftertreatment modes
- EGR valve control in aftertreatment modes 2
- EGR valve control in aftertreatment modes 3
- EGR valve control in aftertreatment modes 4
- EGR valve control in aftertreatment modes 5
- EGR valve control in aftertreatment modes 6
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection period - correction
- Maximum injection period
- Max injection limit - limp mode
- Injection 1
- Injection in aftertreatment modes 1
- Torque limiter
- Smoke limiter
- RPM limiter - fuel cut
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation in aftertreatment modes
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Air mass flow
- Driver torque request
- Driver torque request AWD
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter for the APS/BPS 2
- Torque limiter in recovery mode
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
Programinės įrangos identifikatoriai (14)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 1037383854 |
1.00.031 | 070906016BT 9676 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390647 |
1.67.022 | 070906016DG 1628 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037383791 |
1.00.021 | 070906016BS 9675 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037384802 |
1.67.019 | 070906016DG 0649 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037380222 |
1.67.027 | 070906016BS 8874 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390646 |
1.67.011 | 070906016D 1629 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037394124 |
1.67.029 | 070906016DE 2543 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037384629 |
1.67.032 | 070906016DE 0629 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037394125 |
1.67.022 | 070906016DG 2556 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037390646 |
1.67.032 | 070906016DE 1629 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037389126 |
1.67.021 | 070906016DD 1106 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037383866 |
1.00.017 | 070906016CA 9705 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037381838 |
1.00.030 | 070906016BT 9345 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037386346 |
1.67.031 | 070906016DE 0954 |
BOSCH EDC16U31/U34/CP34 |
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
