VOLKSWAGEN TIGUAN Mk2 2.0L L4 16V TDI 110kW/148HP DSG DQ500 MQB

ECU TEMIC DQ500 MQB · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN TIGUAN Mk2 2.0L L4 16V TDI 110kW/148HP DSG DQ500 MQB

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 5 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisTIGUAN Mk2
Variklis2.0L L4 16V TDI 110kW/148HP DSG DQ500 MQB
Serijinė galia150 CV / 11 kW
Darbinis tūris2000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasTEMIC
ModelisDQ500 MQB
Atmintis / EPROMMicro Renesas - 20480 Kbit

Galimos derinimo operacijos / parinktys:

  • Maximum time for gear downshift
  • Time shift
  • Time shift with torque reduction
  • Time shift with torque reduction 2
  • Engagement time for gear overlap
  • Maximum torque limitation at clutch
  • Clutch torque reduction factor
  • Gearbox torque limiter
  • Gearbox torque limiter 2
  • Maximum torque reduction in ECO (D)
  • Maximum torque reduction during launch control
  • Maximum torque reduction in MANUAL
  • Maximum torque reduction in SPORT (S)
  • RPM limiter
  • RPM limiter - N
  • Maximum torque allowed for gear upshift
  • Gearbox torque limiter for ECT sensor
  • Engine torque limiter depending on vehicle speed
  • Maximum allowable oil pressure
  • Maximum oil pressure allowed at the clutch
  • Maximum upshifting time for 2 gears
  • Maximum upshifting time for 3 gears
  • Maximum upshifting time for 4 gears
  • Maximum upshifting time for 5 gears
  • Oil pressure during adaptations
  • Oil pressure correction based on TOT
  • Gear based pressure verification
  • Shift time with torque reduction
  • Shift time with torque reduction 2
  • Shift timing for gear downshift without load

Programinės įrangos identifikatoriai (5)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
0DL300011A 1.94.0070DL300011A 1410 TEMIC DQ500 MQB
0DL300012G 1.94.0030DL300012G 2004 TEMIC DQ500 MQB
0DL300012M 1.94.0020DL300012M 2620 TEMIC DQ500 MQB
0DL300012N 1.94.0230DL300012N 2110 TEMIC DQ500 MQB
0DL300012M 1.94.0030DL300012M 2106 TEMIC DQ500 MQB

ECU pastabos

Microprocessor SH72549 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata