VOLKSWAGEN SHARAN 1 2.8L V6 24V 150kW/201HP ME7.1/7.5

ECU BOSCH ME7.1.1 · 204 CV (15 kW) · 2800 cc · Benzina aspirato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN SHARAN 1 2.8L V6 24V 150kW/201HP ME7.1/7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 9 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisSHARAN 1
Variklis2.8L V6 24V 150kW/201HP ME7.1/7.5
Serijinė galia204 CV / 15 kW
Darbinis tūris2800 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.1.1
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Knock correction advance max
  • Load / throttle position reference
  • Basic value Lambda sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda reference
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Air mass flow
  • Driver torque request

Programinės įrangos identifikatoriai (9)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612084371037368650 1.21.004022906032EJ 5525 BOSCH ME7.1.1
02612068161037360628 1.21.024022906032G 0011 BOSCH ME7.1/3
02612073821037362920 1.21.004022906032AQ 0005 BOSCH ME7.1/3
02612073841037362915 1.21.005022906032AR 0005 BOSCH ME7.1/3
02612073861037372942 1.21.014022906032AS 0005 BOSCH ME7.1/3
02612073861037362338 1.21.004022906032AS 0004 BOSCH ME7.1/3
02612080101037367570 1.21.005022906032CT 0003 BOSCH ME7.1/3
02612084361037368649 1.21.004022906032EH 5523 BOSCH ME7.1/3
02612066001037352823 1.21.01406A906032AK 3567 BOSCH ME7.5

ECU pastabos

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata