VOLKSWAGEN JETTA 6 (A6) 2.5L 20V 125kW/168HP ME17.5.6

ECU BOSCH ME17.5.6 · 170 CV (125 kW) · 2500 cc · Benzina aspirato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN JETTA 6 (A6) 2.5L 20V 125kW/168HP ME17.5.6

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 36 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisJETTA 6 (A6)
Variklis2.5L 20V 125kW/168HP ME17.5.6
Serijinė galia170 CV / 125 kW
Darbinis tūris2500 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME17.5.6
Atmintis / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • RPM Limiter 5
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management

Programinės įrangos identifikatoriai (36)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.94.00407K906055DK 5683 BOSCH ME17.5.6
1.94.00207K906055A 9214 BOSCH ME17.5.6
1.94.00407K906055DH 4739 BOSCH ME17.5.6
1.94.00207K906055A 8234 BOSCH ME17.5.6
1.94.00707K906055F 9216 BOSCH ME17.5.6
1.94.00407K906055L 1303 BOSCH ME17.5.6
1.94.00307K906055J 1414 BOSCH ME17.5.6
1.94.00407K906055BR 1303 BOSCH ME17.5.6
1.94.00907K906055DL 1200 BOSCH ME17.5.6
1.94.00907K906055BR 1102 BOSCH ME17.5.6
1.94.01007K906055CM 1100 BOSCH ME17.5.6
1.94.00407K906055CP 4725 BOSCH ME17.5.6
1.94.00507K906055A 9740 BOSCH ME17.5.6
1.94.00507K906055EC 1401 BOSCH ME17.5.6
1.94.00207K906055DK 4733 BOSCH ME17.5.6
1.94.00507K906055E 5858 BOSCH ME17.5.6
1.94.00807K906055CT 3851 BOSCH ME17.5.6
1.94.02007K906055J 1005 BOSCH ME17.5.6
1.94.00507K906055BB 9534 BOSCH ME17.5.6
1.94.00806G906055C 1212 BOSCH ME17.5.6
1.94.00407K906055H 1414 BOSCH ME17.5.6
1.94.00607K906055BS 1303 BOSCH ME17.5.6
1.94.01207K906055ED 1401 BOSCH ME17.5.6
1.94.00207K906055CH 5863 BOSCH ME17.5.6
1.94.00307K906055DD 5685 BOSCH ME17.5.6
1.94.00507K906055CM 1501 BOSCH ME17.5.6
1.94.00307K906055AL 5856 BOSCH ME17.5.6
1.94.00307K906055H 1004 BOSCH ME17.5.6
1.94.00307K906055CJ 6448 BOSCH ME17.5.6
1.94.00207K906055CP 5872 BOSCH ME17.5.6
1.94.00307K906055G 9217 BOSCH ME17.5.6
1.94.00207K906055C 3691 BOSCH ME17.5.6
1.94.00307K906055CP 4336 BOSCH ME17.5.6
1.94.00607K906055BT 1100 BOSCH ME17.5.6
1.94.00907K906055J 1107 BOSCH ME17.5.6
1.94.00807K906055BS 1102 BOSCH ME17.5.6

ECU pastabos

MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop