Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 9 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | VOLKSWAGEN |
| Modelis | JETTA 6 (A6) |
| Variklis | 1.4L 16V TSI 90kW/121HP MED17.5.5 |
| Serijinė galia | 122 CV / 9 kW |
| Darbinis tūris | 1400 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MED17.5.20 |
| Atmintis / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
Galimos derinimo operacijos / parinktys:
- Base timing
- Optimal spark timing/MBT
- Advance correction
- Height correction for boost pressure
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Compression ratio for turbocharger protection
- Exhaust gas temperature
- Gearbox maximum torque allowed
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- High fuel pressure pump limit
- High pressure fuel pump setpoint - limp home mode
- High-pressure fuel pump - in catalyst heating monitoring mode
- Intake valve lift
- Intake valve lift - catalyst heating
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- RPM Limiter 2
- RPM limiter 3
- Lambda driver wish
- Knock detection factor
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Maximum intake manifold pressure
- Max torque profile
- Optimal engine moment
- Power limit torque table
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation - sport/race mode
- Pressure ratio depending on IAT
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Throttle angle management
Programinės įrangos identifikatoriai (9)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.94.010 | 03C906022J 1579 |
BOSCH MED17.5.20 |
| — | — |
1.94.012 | 03C906016HQ 7739 |
BOSCH MED17.5.5 |
| — | — |
1.94.016 | 03C906016HK 8201 |
BOSCH MED17.5.5 |
| — | — |
1.94.010 | 03C906016FT 4623 |
BOSCH MED17.5.5 |
| — | — |
1.94.015 | 03C906016HJ 7803 |
BOSCH MED17.5.5 |
| — | — |
1.94.009 | 03C906016BT 7805 |
BOSCH MED17.5.5 |
| — | — |
1.94.028 | 03C906016BS 2339 |
BOSCH MED17.5.5 |
| — | — |
1.94.013 | 03C906016BT 4773 |
BOSCH MED17.5.5 |
| — | — |
1.94.007 | 03C906016BT 3498 |
BOSCH MED17.5.5 |
ECU pastabos
MICRO Infineon Tricore TC1766 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
