VOLKSWAGEN JETTA 4 (A4) 1.8L 20V TURBO 110KW/148HP ME7.5 — ECU BOSCH ME7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 2 programinės įrangos versijos

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą

Esate servisas ar derintojas?

Transporto priemonės duomenys

Markė	VOLKSWAGEN
Modelis	JETTA 4 (A4)
Variklis	1.8L 20V TURBO 110KW/148HP ME7.5
Serijinė galia	150 CV / 11 kW
Darbinis tūris	1800 cc
Kuras	Benzina sovralimentato
Transporto priemonės tipas	Auto

ECU

Gamintojas	BOSCH
Modelis	ME7.5
Atmintis / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Galimos derinimo operacijos / parinktys:

Advance at part load
Boost pressure limiter for diagnostics
Boost pressure limiter
Boost pressure limiter 2
Load / throttle position reference
Injection at part load
Advance limiter
Torque limiter
Lambda enrichment for components protection
Knock detection factor
Speed limiter
P
Max boost pressure control
Load/throttle position reference - AT
Air mass flow

Programinės įrangos identifikatoriai (2)

Aparatinės įrangos Nr.	Programinės įrangos Nr. (lustas)	Versija	Atnaujinimo programinė įranga	ECU
0261206553	1037354129	1.21.011	06A906032CM V005	BOSCH ME7.5
0261207447	1037362938	1.21.008	06A906032HF 0005	BOSCH ME7.5

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą Esate servisas ar derintojas?Siūlykite šias paslaugas patys: aktyvuokite savo TuningFile platformą

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Kiti VOLKSWAGEN

GOLF 3 (A3)
2.8L VR6 128kW/172HP MOTRONIC GOLF 3 (A3)
2.0L 8V 85kW/114HP BOSCH GOLF 3 (A3)
2.0L 16V 110kW/148HP 5WP4 GOLF 3 (A3)
1.4L 8V 44kW/59HP MOTRONIC GOLF 3 (A3)
1.6L 8V 55kW/74HP MOTRONIC GOLF 3 (A3)
1.8L 8V 66kW/89HP MOTRONIC GOLF 3 (A3)
1.9L TDI 66kW/89HP DIL PASSAT 3 (B3)
1.6L 8V 54kW/72HP MOTRONIC PASSAT 3 (B3)
1.8L 8V 81kW/109HP MOTRONIC PASSAT 3 (B3)
1.9L TDI 66kW/89HP EDC 1.3.3

→ Visos ECU VOLKSWAGEN