VOLKSWAGEN EOS 2.0L 8V TDI 103kW/138HP EDC16U34

ECU BOSCH EDC16U31/U34/CP34 · 140 CV (103 kW) · 2000 cc · Diesel sovralimentato

ECU duomenų bazėVOLKSWAGEN › VOLKSWAGEN EOS 2.0L 8V TDI 103kW/138HP EDC16U34

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 13 programinės įrangos versijos

Transporto priemonės duomenys

MarkėVOLKSWAGEN
ModelisEOS
Variklis2.0L 8V TDI 103kW/138HP EDC16U34
Serijinė galia140 CV / 103 kW
Darbinis tūris2000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisEDC16U31/U34/CP34
Atmintis / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Galimos derinimo operacijos / parinktys:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • EGR valve control
  • EGR valve control 2
  • EGR valve control 3
  • EGR valve control 4
  • EGR valve control 5
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period - correction
  • Injection 1
  • Torque limiter
  • Smoke limiter
  • RPM limiter - fuel cut
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for fuel overheating
  • Protection for oil overheating
  • Driver torque request
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit

Programinės įrangos identifikatoriai (13)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1037382429 1.67.01303G906021CE 9394 BOSCH EDC16U31/U34/CP34
1037382671 1.67.01403G906021FS 9397 BOSCH EDC16U31/U34/CP34
1037393555 1.67.01703G906021TA 2124 BOSCH EDC16U31/U34/CP34
1037387849 1.67.01603G906021TA 1210 BOSCH EDC16U31/U34/CP34
1037383799 1.67.02103G906021CF 9691 BOSCH EDC16U31/U34/CP34
1037381825 1.67.01403G906021FS 9295 BOSCH EDC16U31/U34/CP34
1037383798 1.67.00903G906021FT 9692 BOSCH EDC16U31/U34/CP34
1037376661 1.67.01603G906021CF 9946 BOSCH EDC16U31/U34/CP34
1037394111 1.67.01403G906021FT 9915 BOSCH EDC16U31/U34/CP34
1037381850 1.67.01403G906021CE 9340 BOSCH EDC16U31/U34/CP34
1037381840 1.67.02803G906021CE 9340 BOSCH EDC16U31/U34/CP34
1037392956 1.67.02103G906021CF 9946 BOSCH EDC16U31/U34/CP34
1037376661 1.67.01503G906021CF 9691 BOSCH EDC16U31/U34/CP34

ECU pastabos

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata