TOYOTA SEQUOIA (XK60) 5.7L V8 32V VVT-i 284kW/381HP DENSO

ECU DENSO 275036-3560 · 386 CV (284 kW) · 5700 cc · Benzina aspirato

ECU duomenų bazėTOYOTA › TOYOTA SEQUOIA (XK60) 5.7L V8 32V VVT-i 284kW/381HP DENSO

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 23 programinės įrangos versijos

Transporto priemonės duomenys

MarkėTOYOTA
ModelisSEQUOIA (XK60)
Variklis5.7L V8 32V VVT-i 284kW/381HP DENSO
Serijinė galia386 CV / 284 kW
Darbinis tūris5700 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasDENSO
Modelis275036-3560
Atmintis / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(IAT)
  • Lambda correction f(IAT) 2
  • Lambda correction f(ECT)
  • Gearbox maximum torque allowed
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Programinės įrangos identifikatoriai (23)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
89663-0CE21- 1.51.00630CE2100 DENSO 275036-3560
89663-0CA82- 1.51.00630CA8200 DENSO 275036-5920
89663-0CF31- 1.51.01030CF3100 DENSO 275036-5920
89663-0C711- 1.51.00330C71100 DENSO 275036-5920
89663-0CK22- 1.51.00730CK2200 DENSO 275036-5920
89663-0CL80- 1.51.00330CL8000 DENSO 275036-5920
89663-0CA53- 1.51.00630CA5300 DENSO 275036-5920
89663-0C892 1.51.00730C89200 DENSO 275036-5920
89663-0CK40- 1.51.00530CK4001 DENSO 275036-5920
89663-0CA72- 1.51.00630CA7200 DENSO 275036-5920
89663-0CN61- 1.67.00330CN6100 DENSO D76F0196F1
89663-0CN52- 1.67.00330CN5200 DENSO D76F0196F1
89663-0CN51- 1.67.00330CN5100 DENSO D76F0196F1
89663-0CN42- 1.67.00330CN4200 DENSO D76F0196F1
89663-0CN41- 1.67.00330CN4100 DENSO D76F0196F1
89663-0CN21- 1.67.00430CN2100 DENSO D76F0196F1
89663-0CN11- 1.67.00330CN1100 DENSO D76F0196F1
89663-0CN01- 1.67.00330CN0100 DENSO D76F0196F1
89663-0CP02- 1.67.00330CP0200 DENSO D76F0196F1
89663-0CP01- 1.67.00330CP0100 DENSO D76F0196F1
89663-0CN81- 1.67.00330CN8100 DENSO D76F0196F1
89663-0CN71- 1.67.00330CN7100 DENSO D76F0196F1
89663-0CN62- 1.67.00330CN6200 DENSO D76F0196F1

Techninės pastabos apie automobilį

OBD located under the steering column, to the right of the pedalboard, accessible without removing anything.

ECU pastabos

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor D76F0196F1 WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.