TOYOTA LAND CRUISER PRADO (J150) 4.0L V6 24V VVT-i 202kW/271HP DENSO

ECU DENSO 275036-3560 · 275 CV (202 kW) · 4000 cc · Benzina aspirato

ECU duomenų bazėTOYOTA › TOYOTA LAND CRUISER PRADO (J150) 4.0L V6 24V VVT-i 202kW/271HP DENSO

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 12 programinės įrangos versijos

Transporto priemonės duomenys

MarkėTOYOTA
ModelisLAND CRUISER PRADO (J150)
Variklis4.0L V6 24V VVT-i 202kW/271HP DENSO
Serijinė galia275 CV / 202 kW
Darbinis tūris4000 cc
KurasBenzina aspirato
Transporto priemonės tipasAuto

ECU

GamintojasDENSO
Modelis275036-3560
Atmintis / EPROMMICRO NEC 76F0070 - 8192 Kbit - 100000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Closed loop target base injection
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • L
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda enrichment - open loop
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Speed limiter
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Exhaust gas temperature sensor
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Programinės įrangos identifikatoriai (12)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
89663-60G62- 1.67.008360G6200 DENSO 275036-3560
89663-60Q60- 1.67.006360Q6000 DENSO 275036-5130
89663-60E31- 1.67.009360E3100 DENSO 275036-5130
89663-60E33- 1.51.016360E3300 DENSO 275036-5130
89663-60E32- 1.51.007360E3200 DENSO 275036-5130
89663-60693- 1.67.01036069300 DENSO 275036-5130
89663-60Q30- 1.67.011360Q3000 DENSO 275036-5130
89663-60Q80- 1.67.012360Q8000 DENSO 275036-5130
89663-60Q50- 1.67.006360Q5000 DENSO 275036-5130
89663-F0852- 1.67.0113F085200 DENSO D76F0196F1
89663-60X71- 1.67.015360X7100 DENSO D76F0196F1
89663-60X72- 1.67.003360X7200 DENSO D76F0196F1

Techninės pastabos apie automobilį

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU pastabos

Microprocessor NEC 76F0070 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor D76F0196F1 WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.