Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 6 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | TOYOTA |
| Modelis | AURIS (E150) |
| Variklis | 2.0L 16V D-4D 91kW/122HP DENSO |
| Serijinė galia | 124 CV / 91 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | DENSO |
| Modelis | 175822-773 |
| Atmintis / EPROM | MICRO NEC 76F0038AGD - 6144 Kbit - C0000 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter for diagnostics
- Boost pressure limiter
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- EGR valve control
- EGR valve control 2
- Variable boost pressure 1
- Injection correction 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Max injection limit
- Max injection limit for APS/BPS sensor
- Max injection limit - limp mode
- Injection correction
- Injection correction for IAT sensor
- J
- Injection 2
- Injection 3
- Injection 4
- Maximum possible engine charge
- Main injection
- Specific injection pressure
- Air mass flow
- Driver torque request
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 3
Programinės įrangos identifikatoriai (6)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 89663-02440- |
1.67.006 | 30244000 |
DENSO 175822-773 |
| — | 89663-02U40- |
1.51.007 | 302U4000 |
DENSO 275922-022 |
| — | 89663-02U41- |
1.51.010 | 302U4100 |
DENSO 275922-022 |
| — | 89663-02U21- |
1.51.010 | 302U2100 |
DENSO 275922-022 |
| — | 89663-02U20- |
1.51.009 | 302U2000 |
DENSO 275922-022 |
| — | 89663-02U20- |
1.51.012 | 302U2000 |
DENSO 275922-022 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU pastabos
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0038AGD This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
