Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 4 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | SKODA |
| Modelis | OCTAVIA (1Z) |
| Variklis | 2.0L 16V TFSI vRS 147kW/197HP MED9.5/5 |
| Serijinė galia | 200 CV / 147 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | MED9.1/5 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Maximum air charge for overboost protection with turbocharger fault
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Boost pressure limiter
- Boost pressure limit control
- Height correction for boost pressure
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Maximum pressure ratio limit for diagnosis
- Exhaust gas temperature
- HFM/HLM threshold for diagnosis
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- Torque limiter 2
- Torque limiter for diagnostic
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- RPM limit for EOT sensor
- Boost pressure linearization
- Lambda driver wish
- Knock detection factor
- Intake manifold pressure
- Maximum boost pressure load
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Optimal engine moment
- Offset tolerance depending on permissible torque
- Relative permissible torque from the pedal position in torque limitation
- Relative permissible torque from the pedal position in torque limitation 2
- Pressure ratio depending on IAT
- Maximum pressure ratio limit depending on temperature
- Driver torque request
- Throttle angle management
- Variable intake pulsation correction
Programinės įrangos identifikatoriai (4)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| 0261S02114 | 1037377701 |
1.58.017 | 1Z0907115 0010 |
BOSCH MED9.1/5 |
| 0261S02339 | 1037386859 |
1.58.012 | 1Z0907115A 0040 |
BOSCH MED9.1/5 |
| 0261S02339 | 1037381208 |
1.58.012 | 1Z0907115A 0010 |
BOSCH MED9.1/5 |
| 0261S02478 | 1037387562 |
1.58.016 | 1Z0907115D 0010 |
BOSCH MED9.1/5 |
ECU pastabos
The only way to modify this ECU is by using the BDM system: TRASDATA or NEW TRASDATA. Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection This Setting File can be used for serial system NewGenius.
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
