Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 19 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | SKODA |
| Modelis | OCTAVIA (1Z) |
| Variklis | 2.0L 16V TDI 103kW/138HP EDC17C46 |
| Serijinė galia | 140 CV / 103 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17C46 |
| Atmintis / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- Max accepted exhaust gas temperature value before turbine
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for exhaust gas temperature before turbine 3
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 3
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Programinės įrangos identifikatoriai (19)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.024 | 03L906018CT 7101 |
BOSCH EDC17C46 |
| — | — |
1.00.020 | 03L906018C 9978 |
BOSCH EDC17C46 |
| — | — |
1.00.024 | 03L906018CT 9814 |
BOSCH EDC17C46 |
| — | — |
1.94.026 | 03L906018RT 5385 |
BOSCH EDC17C46 |
| — | — |
1.94.015 | 03L906018DA 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.009 | 03L906018EE 9779 |
BOSCH EDC17C46 |
| — | — |
1.94.017 | 03L906018EH 9480 |
BOSCH EDC17C46 |
| — | — |
1.94.008 | 03L906018DA 9978 |
BOSCH EDC17C46 |
| — | — |
1.94.011 | 03L906018EE 9977 |
BOSCH EDC17C46 |
| — | — |
1.94.015 | 03L906018EE 7801 |
BOSCH EDC17C46 |
| — | — |
1.00.034 | 03L906018DA 7102 |
BOSCH EDC17C46 |
| — | — |
1.94.012 | 03L906018SR 9981 |
BOSCH EDC17C46 |
| — | — |
1.00.004 | 03L906018CT 9978 |
BOSCH EDC17C46 |
| — | — |
1.00.018 | 03L906018C 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.021 | 03L906018DA 9815 |
BOSCH EDC17C46 |
| — | — |
1.00.022 | 03L906018C 7100 |
BOSCH EDC17C46 |
| — | — |
1.00.012 | 03L906018C 9813 |
BOSCH EDC17C46 |
| — | — |
1.00.017 | 03L906018CT 9977 |
BOSCH EDC17C46 |
| 0281016897 | — |
1.94.007 | 03L906018EF 9977 |
BOSCH EDC17C46 |
ECU pastabos
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
