SKODA OCTAVIA (1Z) 2.0L 16V TDI 103kW/138HP EDC16U31 — ECU BOSCH EDC16U31/U34/CP34

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 27 programinės įrangos versijos

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą

Esate servisas ar derintojas?

Transporto priemonės duomenys

Markė	SKODA
Modelis	OCTAVIA (1Z)
Variklis	2.0L 16V TDI 103kW/138HP EDC16U31
Serijinė galia	140 CV / 103 kW
Darbinis tūris	2000 cc
Kuras	Diesel sovralimentato
Transporto priemonės tipas	Auto

ECU

Gamintojas	BOSCH
Modelis	EDC16U31/U34/CP34
Atmintis / EPROM	M58BW016DB PQFP80 - Flash 3_V 512 x 32

Galimos derinimo operacijos / parinktys:

Boost pressure limiter
Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Boost pressure 2
Boost pressure 3
Boost pressure 4
EGR valve control
EGR valve control 2
EGR valve control 3
EGR valve control 4
EGR valve control 5
Protection for engine overheating
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection period
Injection period 2
Injection period 3
Injection period 4
Injection period 5
Injection period - correction
Injection 1
Torque limiter
Smoke limiter
RPM limiter - fuel cut
Lambda value of the smoke limitation
Minimum LSU sensor temperature for O2
Maximum LSU sensor temperature for O2
LSU temperature threshold PID heater governor activation
Protection for air load overheating
Protection for fuel overheating
Protection for oil overheating
Driver torque request
CAT downstream temperature sensor characterization
Torque limiter for the 1st gear selected
Torque limiter for the 2nd gear selected
Torque limiter for the 3rd gear selected
Torque limiter for the 4th gear selected
Torque limiter for the 5th gear selected
Torque limiter for the 6th gear selected
Torque limiter for selected gear
Torque limiter for for reverse gear
Torque limiter for the APS/BPS
Torque limiter in recovery mode
Turbocharger volumetric efficiency
Variable geometry duty cycle limit

Programinės įrangos identifikatoriai (27)

Aparatinės įrangos Nr.	Programinės įrangos Nr. (lustas)	Versija	Atnaujinimo programinė įranga	ECU
—	1037390602	1.67.013	03G906021MC 9817	BOSCH EDC16U31/U34/CP34
—	1037382084	1.67.017	03G906021MC 9093	BOSCH EDC16U31/U34/CP34
—	1037390603	1.67.012	03G906021JC 1369	BOSCH EDC16U31/U34/CP34
—	1037393522	1.67.013	03G906021TD 2049	BOSCH EDC16U31/U34/CP34
—	1037391532	1.67.020	03G906021LD 9902	BOSCH EDC16U31/U34/CP34
—	1037397893	1.67.024	03G997013K 3530	BOSCH EDC16U31/U34/CP34
—	1037376661	1.67.016	03G906021PQ 2285	BOSCH EDC16U31/U34/CP34
—	1037392969	1.67.018	03G906021JC 2118	BOSCH EDC16U31/U34/CP34
—	1037376661	1.67.011	03G906021MC 9093	BOSCH EDC16U31/U34/CP34
—	1037381362	1.67.016	03G906021LE 9189	BOSCH EDC16U31/U34/CP34
—	1037381024	1.67.014	03G906021LD 9184	BOSCH EDC16U31/U34/CP34
—	1037393521	1.67.022	03G906021TC 2048	BOSCH EDC16U31/U34/CP34
—	1037382441	1.67.014	03G906021JC 0142	BOSCH EDC16U31/U34/CP34
—	1037392971	1.67.023	03G906021MC 9948	BOSCH EDC16U31/U34/CP34
—	1037379453	1.67.014	03G906021GD 8484	BOSCH EDC16U31/U34/CP34
—	1037392989	1.67.016	03G906021TF 2050	BOSCH EDC16U31/U34/CP34
—	1037379738	1.67.029	03G906021LD 8514	BOSCH EDC16U31/U34/CP34
—	1037382441	1.67.023	03G906021JC 0124	BOSCH EDC16U31/U34/CP34
—	1037376661	1.67.015	03G906021MC 9817	BOSCH EDC16U31/U34/CP34
—	1037392997	1.67.025	03G906021PQ 2285	BOSCH EDC16U31/U34/CP34
—	1037379739	1.67.014	03G906021LE 8502	BOSCH EDC16U31/U34/CP34
—	1037376661	1.67.012	03G906021TB 2047	BOSCH EDC16U31/U34/CP34
—	1037377150	1.67.010	03G906021LB 8501	BOSCH EDC16U31/U34/CP34
—	1037382085	1.67.011	03G906021MD 9095	BOSCH EDC16U31/U34/CP34
—	1037377150	1.67.015	03G906021GD 8484	BOSCH EDC16U31/U34/CP34
—	1037391531	1.67.013	03G906021LE 9903	BOSCH EDC16U31/U34/CP34
—	1037380195	1.67.012	03G906021CJ 8510	BOSCH EDC16U31/U34/CP34

ECU pastabos

This Setting File can be used for serial programming system NewGenius. The only way to modify this ECU is by using the BDM system: TRASDATA or NEW TRASDATA. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4.

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.

This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4.

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. To work on this ECU you can use NewTrasdata

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. The only way to modify this ECU is by using the BDM system: TRASDATA or NEW TRASDATA. This Setting File can be used for serial system : Genius or NewGenius.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy

Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą Esate servisas ar derintojas?Siūlykite šias paslaugas patys: aktyvuokite savo TuningFile platformą

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Kiti SKODA

FELICIA Mk1/Mk2
1.3L OCTAVIA (1U)
1.8L 20V 125HP PSOP M3.8.3 FORMAN
1.3L 8V 40kW/54HP MOTRONIC OCTAVIA (1U)
1.9L 8V TDI 81kW/110HP EDC15 V/VM/VM+ FELICIA Mk1/Mk2
1.6L OCTAVIA (1U)
1.6L 8V 55kW/75HP IAW1AV OCTAVIA (1U)
1.8L 20V TURBO 110kW/150HP M3.8.3 OCTAVIA (1U)
2.0L 8V 85kW/115HP M5.92 FABIA Mk1 (6Y)
1.4L 16V 75/101HP IAW 4LV/4MV FABIA Mk1 (6Y)
1.4L 8V MPI 51kW/68HP SIMOS3

→ Visos ECU SKODA