SEAT TOLEDO (5P) 1.9L 8V TDI 77kW/103HP EDC16U1

ECU BOSCH EDC16U1 · 105 CV (77 kW) · 1900 cc · Diesel sovralimentato

ECU duomenų bazėSEAT › SEAT TOLEDO (5P) 1.9L 8V TDI 77kW/103HP EDC16U1

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 4 programinės įrangos versijos

Transporto priemonės duomenys

MarkėSEAT
ModelisTOLEDO (5P)
Variklis1.9L 8V TDI 77kW/103HP EDC16U1
Serijinė galia105 CV / 77 kW
Darbinis tūris1900 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisEDC16U1
Atmintis / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Galimos derinimo operacijos / parinktys:

  • Smoke limiter 2
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Load / throttle position reference
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection period
  • Injection correction
  • Injection correction for IAT sensor
  • J
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Pre-injection basic value 2
  • Driver torque request
  • Variable geometry duty cycle limit

Programinės įrangos identifikatoriai (4)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02810118641037370804 1.00.01303G906016DH 6093 BOSCH EDC16U1
02810118851037370803 1.00.00203G906016DG 6092 BOSCH EDC16U1
02810118851037370804 1.00.01003G906016DG 6092 BOSCH EDC16U1
02810129221037377217 1.00.01303G906016KL 7825 BOSCH EDC16U1

ECU pastabos

Original EPROM SSOP 56 pins AMD 29BL802CB - Microprocessor MOTOROLA MPC555/6. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. This Setting File can be used for serial system NewGenius.

Galimi papildomi moduliai

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop