SEAT LEON (5F) 2.0L 16V TDI 110kW/148HP DSG DQ250

ECU TEMIC DQ250 GEN1/MQB · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU duomenų bazėSEAT › SEAT LEON (5F) 2.0L 16V TDI 110kW/148HP DSG DQ250

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 1 programinės įrangos versijos

Transporto priemonės duomenys

MarkėSEAT
ModelisLEON (5F)
Variklis2.0L 16V TDI 110kW/148HP DSG DQ250
Serijinė galia150 CV / 11 kW
Darbinis tūris2000 cc
KurasDiesel sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasTEMIC
ModelisDQ250 GEN1/MQB
Atmintis / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

Galimos derinimo operacijos / parinktys:

  • Gear downshift 2->1
  • Gear downshift 3->2
  • Gear downshift 4->3
  • Gear downhift 5->4
  • Gear downshift 6->5
  • Direct gear engagement time
  • Minimum RPM for the gear downshift
  • Minimum rpm for gear upshifts
  • Time shift with torque reduction
  • Gear upshift 1->2
  • Gear upshift 1->2 - NORMAL mode (D)
  • Gear upshift 2->3
  • Gear upshift 2->3 - NORMAL mode (D)
  • D-US
  • Gear upshift 3->4 - NORMAL mode (D)
  • Gear upshift 4->5
  • Gear upshift 4->5 - NORMAL mode (D)
  • Gear upshift 5->6
  • Gear upshift 5->6 - NORMAL mode (D)
  • E-DS
  • Vehicle max speed for upshifts
  • Maximum time for gear downshift
  • Time shift
  • Engagement time for overlapping gear downshift
  • E-US
  • Maximum torque limitation at clutch
  • Gearbox torque limiter
  • Gearbox torque limiter while taking off
  • RPM limiter
  • Engine speed limit at high oil temperature
  • RPM limiter in limp mode
  • RPM limiter - N
  • Gearbox torque limiter for ECT sensor
  • Engine torque limiter depending on vehicle speed
  • Solenoid current for oil pressure
  • Maximum solenoid current for maximum clutch torque
  • Maximum allowable oil pressure
  • Minimum oil pressure allowed at the clutch
  • Maximum oil pressure allowed at the clutch
  • Minimum oil pressure at filling
  • Desired clutch oil pressure
  • Maximum upshifting time for 2 gears
  • Maximum upshifting time for 3 gears
  • Maximum upshifting time for 4 gears
  • O-DS
  • Maximum clutch oil pressure
  • Oil pressure during adaptations
  • Oil pressure correction based on TOT
  • Oil pressure required while moving
  • Oil pressure based on torque
  • Gear upshift 3->4
  • RPM for the engine stall with ESP ON
  • RPM for the engine stall with ESP OFF
  • Shift time with torque reduction
  • Gear upshift 1->2 - SPORT mode (S)
  • S-US
  • Gear upshift 2->3 - SPORT mode (S)
  • Gear upshift 3->4 - SPORT mode (S)
  • Gear upshift 4->5 - SPORT mode (S)
  • Gear upshift 5->6 - SPORT mode (S)
  • Clutch torque limit during acceleration - gear R
  • Clutch torque limit during acceleration - gear 1,3,5
  • Clutch torque limit during acceleration - gear 2,4,6
  • Gear downshift - limiter
  • Gear upshift 1->2 limiter
  • Gear upshift 1->2 - MANUAL mode
  • Gear upshift 2->3 limiter
  • Gear upshift 2->3 - MANUAL mode
  • Gear upshift 3->4 limiter
  • Gear upshift 3->4 - MANUAL mode
  • Gear upshift 4->5 limiter
  • Gear upshift 4->5 - MANUAL mode
  • Gear upshift 5->6 limiter
  • Gear upshift 5->6 - MANUAL mode
  • Clutch torque variation during gear shifting

Programinės įrangos identifikatoriai (1)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02E927770AQ4305001001 1.94.0090D9300040N 4305 TEMIC DQ250 GEN1/MQB

ECU pastabos

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata