SEAT LEON (5F) 1.4L 16V TSI 110kW/148HP MED17.5.25

ECU BOSCH MED17.5.25 · 150 CV (11 kW) · 1400 cc · Benzina sovralimentato

ECU duomenų bazėSEAT › SEAT LEON (5F) 1.4L 16V TSI 110kW/148HP MED17.5.25

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) ✓ Galimas papildomas modulis 14 programinės įrangos versijos

Transporto priemonės duomenys

MarkėSEAT
ModelisLEON (5F)
Variklis1.4L 16V TSI 110kW/148HP MED17.5.25
Serijinė galia150 CV / 11 kW
Darbinis tūris1400 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisMED17.5.25
Atmintis / EPROMMICRO ST TRICORE - 20480 Kbit - 280000

Galimos derinimo operacijos / parinktys:

  • Maximum air charge for overboost protection with turbocharger fault
  • Base timing
  • Optimal spark timing/MBT
  • Advance correction
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Maximum torque limitation at clutch
  • Compression ratio for turbocharger protection
  • Compression ratio limiting for compressor depending on IAT sensor
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Engine indicated torque
  • Factor for reducing maximum filling
  • Gearbox maximum torque allowed
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • High fuel pressure pump limit
  • High fuel pressure pump limit 2
  • High pressure fuel pump setpoint - limp home mode
  • High-pressure fuel pump - in catalyst heating monitoring mode
  • Injection period - correction
  • Intake valve lift
  • Intake valve lift - catalyst heating
  • Lambda enrichment for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limiter 3
  • RPM limiter - N
  • RPM limiter in Park position
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Maximum engine power
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Maximum intake manifold pressure
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation - sport/race mode
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Driver torque request 2
  • Driver torque request AWD
  • Driver torque request for reverse gear
  • Torque limiter for selected gear
  • Setpoint maximum turbocharger speed
  • Throttle angle management
  • Maximum upper tolerance intake pressure protection

Programinės įrangos identifikatoriai (14)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.94.01204E906027HF 3744 BOSCH MED17.5.25
1.94.01404E906027HE 2604 BOSCH MED17.5.25
1.94.00704E906027ET 3151 BOSCH MED17.5.25
1.94.01204E906027BL 9223 BOSCH MED17.5.25
1.94.01204E906027EF 8141 BOSCH MED17.5.25
1.94.00704E906027AT 8140 BOSCH MED17.5.25
1037547294 1.94.02904E906027BL 8139 BOSCH MED17.5.25
1.94.00804E906027AT 9073 BOSCH MED17.5.25
1.94.00304E906027HF 2489 BOSCH MED17.5.25
1.94.00904E906027HF 3545 BOSCH MED17.5.25
1.94.02004E906027HF 2326 BOSCH MED17.5.25
1.94.00904E906027BL 7965 BOSCH MED17.5.25
1.94.00904E906027BL 8235 BOSCH MED17.5.25
1.94.01104E906027BL 9003 BOSCH MED17.5.25

ECU pastabos

Microprocessor TC1782 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata