SEAT IBIZA CUPRA 1.8L TURBO 115kW/154HP ME7.5

ECU BOSCH ME7.5 · 156 CV (115 kW) · 1800 cc · Benzina sovralimentato

ECU duomenų bazėSEAT › SEAT IBIZA CUPRA 1.8L TURBO 115kW/154HP ME7.5

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 9 programinės įrangos versijos

Transporto priemonės duomenys

MarkėSEAT
ModelisIBIZA CUPRA
Variklis1.8L TURBO 115kW/154HP ME7.5
Serijinė galia156 CV / 115 kW
Darbinis tūris1800 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasBOSCH
ModelisME7.5
Atmintis / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Boost pressure limiter 4
  • Boost pressure limiter 5
  • Boost pressure limit control
  • Height correction for boost pressure
  • Desired engine load calculation
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum boost pressure load
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Throttle angle management
  • Variable intake pulsation correction

Programinės įrangos identifikatoriai (9)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
02612014461037380506 1.42.02106A906012F 0010 BOSCH ME7.5
02612060231037350228 1.21.01806A906032E 2730 BOSCH ME7.5
02612070711037354562 1.21.0346K0906032AA 0002 BOSCH ME7.5
02612076171037362372 1.21.0176K0906032AQ 0001 BOSCH ME7.5
02612083701037369321 1.42.05806A906032QN 0010 BOSCH ME7.5
02612083701037371181 1.42.02006A906032QN 0020 BOSCH ME7.5
02612083711037368057 1.42.01506A906032QP XN10 BOSCH ME7.5
02612083711037371711 1.42.01406A906032QP 0020 BOSCH ME7.5
02612085221037371746 1.42.01106A906032RQ 0010 BOSCH ME7.5

ECU pastabos

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.