SEAT ALHAMBRA (7M) 2.0L 16V TDI 103kW/140HP EDC16+ — ECU BOSCH EDC16U31/U34/CP34

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 6 programinės įrangos versijos

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą

Esate servisas ar derintojas?

Transporto priemonės duomenys

Markė	SEAT
Modelis	ALHAMBRA (7M)
Variklis	2.0L 16V TDI 103kW/140HP EDC16+
Serijinė galia	140 CV / 103 kW
Darbinis tūris	2000 cc
Kuras	Diesel sovralimentato
Transporto priemonės tipas	Auto

ECU

Gamintojas	BOSCH
Modelis	EDC16U31/U34/CP34
Atmintis / EPROM	M58BW016DB PQFP80 - Flash 3_V 512 x 32

Galimos derinimo operacijos / parinktys:

Smoke limiter 2
Main injection duration angle
Boost pressure limiter
Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Boost pressure 2
Boost pressure in aftertreatment modes
Boost pressure in aftertreatment modes 2
Boost pressure in aftertreatment modes 3
EGR valve control
EGR valve control 2
EGR valve control in aftertreatment modes
EGR valve control in aftertreatment modes 2
EGR valve control in aftertreatment modes 3
EGR valve control in aftertreatment modes 4
EGR valve control in aftertreatment modes 5
EGR valve control in aftertreatment modes 6
Exhaust gas temperature
Protection for engine overheating
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Gearbox maximum torque allowed
Injection period
Injection period - correction
Maximum injection period
Max injection limit - limp mode
Injection 1
Injection in aftertreatment modes 1
Torque limiter
Smoke limiter
RPM limiter - fuel cut
Lambda value of the smoke limitation
Lambda value of the smoke limitation in aftertreatment modes
Minimum LSU sensor temperature for O2
Maximum LSU sensor temperature for O2
LSU temperature threshold PID heater governor activation
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for oil overheating
Air mass flow
Driver torque request
Driver torque request 2
Driver torque request 3
Driver torque request AWD
CAT downstream temperature sensor characterization
Torque limiter for the 1st gear selected
Torque limiter for the 2nd gear selected
Torque limiter for the 3rd gear selected
Torque limiter for the 4th gear selected
Torque limiter for the 5th gear selected
Torque limiter for the 6th gear selected
Torque limiter for selected gear
Torque limiter for for reverse gear
Torque limiter for the APS/BPS
Torque limiter for the APS/BPS 2
Torque limiter in recovery mode
Torque limiter in recovery mode 2
Volumetric efficiency
Turbocharger volumetric efficiency
Variable geometry duty cycle limit
Variable geometry duty cycle limit 2
Variable geometry duty cycle limit 3

Programinės įrangos identifikatoriai (6)

Aparatinės įrangos Nr.	Programinės įrangos Nr. (lustas)	Versija	Atnaujinimo programinė įranga	ECU
—	1037387081	1.67.021	03G906016JP 9771	BOSCH EDC16U31/U34/CP34
—	1037378835	1.67.013	03G906016JN 8408	BOSCH EDC16U31/U34/CP34
—	1037396422	1.67.017	03G906016MQ 3091	BOSCH EDC16U31/U34/CP34
—	1037387085	1.67.020	03G906016JN 9770	BOSCH EDC16U31/U34/CP34
—	1037381822	1.67.021	03G906016JP 9330	BOSCH EDC16U31/U34/CP34
—	1037381823	1.67.019	03G906016JN 9329	BOSCH EDC16U31/U34/CP34

ECU pastabos

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.

Gaukite failą šiai transporto priemonei

Pirkti failą (originalų arba perprogramuotą)Užsiregistruokite mastertuningfile.com ir užsisakykite failą Esate servisas ar derintojas?Siūlykite šias paslaugas patys: aktyvuokite savo TuningFile platformą

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Kiti SEAT

CORDOBA
1.6L 8V 56kW/75HP MOTRONIC CORDOBA
1.8L 8V 66kW/88HP MOTRONIC IBIZA (6K)
1.4L 8V 44kW/59HP MOTRONIC IBIZA (6K)
1.6L 8V 55kW/74HP MOTRONIC IBIZA (6K)
1.3L 8V 40kW/54HP MOTRONIC IBIZA (6K)
1.8L 8V 66kW/88HP MOTRONIC IBIZA (6K)
2.0L 8V 85kW/114HP SIEMENS TOLEDO (1M)
1.6L 8V 54kW/73HP MOTRONIC TOLEDO (1M)
2.0L 8V 85kW/114HP DIGIFANT 1.7 TOLEDO (1M)
2.0L 16V 110kW/147HP 5WP 4201

→ Visos ECU SEAT