RENAULT TWINGO 2 1.2L 16V TCE 74kW/99HP SIM32

ECU CONTINENTAL-SIEMENS-VDO SIM32 · 100 CV (74 kW) · 1200 cc · Benzina sovralimentato

ECU duomenų bazėRENAULT › RENAULT TWINGO 2 1.2L 16V TCE 74kW/99HP SIM32

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 6 programinės įrangos versijos

Transporto priemonės duomenys

MarkėRENAULT
ModelisTWINGO 2
Variklis1.2L 16V TCE 74kW/99HP SIM32
Serijinė galia100 CV / 74 kW
Darbinis tūris1200 cc
KurasBenzina sovralimentato
Transporto priemonės tipasAuto

ECU

GamintojasCONTINENTAL-SIEMENS-VDO
ModelisSIM32
Atmintis / EPROMMicro RENESAS - 4096 Kbit - 80000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Boost pressure limiter
  • Boost pressure
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Programinės įrangos identifikatoriai (6)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
1.73.017 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200807588 1.73.0188200799147 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015965 1.73.0158200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200807588 1.73.0108200799147 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201109657 1.73.0198200899441 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015967 1.73.0178200799147 CONTINENTAL-SIEMENS-VDO SIM32

ECU pastabos

Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata