Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 13 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | PORSCHE |
| Modelis | CAYENNE (92A) |
| Variklis | 4.2L V8 32V S TDI 281kW/377HP EDC17CP44 |
| Serijinė galia | 382 CV / 281 kW |
| Darbinis tūris | 4200 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC17CP44 |
| Atmintis / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter
- Boost pressure
- Protection for cylinder head overheating
- Regeneration limit for DPF
- Regeneration limit for DPF 2
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for diagnostic 3
- Torque limiter for diagnostic 4
- Torque limiter during inactive pre-injection
- Smoke limiter
- RPM limit for ECT sensor
- RPM limit for ECT sensor 2
- Lambda reference
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Speed limiter - reverse gear
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure - cold correction
- Driver torque request
- Driver torque request - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for the 7th gear selected
- Torque limiter for the 8th gear selected
- Torque limiter for the 9th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
Programinės įrangos identifikatoriai (13)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.00.020 | 7P5907409D 0001 |
BOSCH EDC17CP44 |
| — | — |
1.00.030 | 7P5907409P 0002 |
BOSCH EDC17CP44 |
| — | — |
1.00.022 | 7P5997409 0002 |
BOSCH EDC17CP44 |
| — | — |
1.00.035 | 7P5997409A 0002 |
BOSCH EDC17CP44 |
| — | — |
1.00.028 | 7P5907409B 0001 |
BOSCH EDC17CP44 |
| — | — |
1.00.008 | 7P5907409E 0001 |
BOSCH EDC17CP44 |
| — | — |
1.00.013 | 7P5907409G 0001 |
BOSCH EDC17CP44 |
| — | — |
1.00.039 | 7P5907409R 0002 |
BOSCH EDC17CP44 |
| — | — |
1.00.010 | 7P5907409R 0003 |
BOSCH EDC17CP44 |
| — | — |
1.00.027 | 7P5907409AB 0003 |
BOSCH EDC17CP44 |
| — | — |
1.00.010 | 7P5907409F 0001 |
BOSCH EDC17CP44 |
| — | — |
1.00.024 | 7P5907409S 0001 |
BOSCH EDC17CP44 |
| — | — |
1.00.026 | 7P5907409 0003 |
BOSCH EDC17CP44 |
ECU pastabos
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
