PGO TIGRA 200 16->19 14kW

ECU BOSCH MSE6.0 · 19 CV (14 kW) · 200 cc · Benzina aspirato

ECU duomenų bazėPGO › PGO TIGRA 200 16->19 14kW

Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.

✓ Derinimas failu (flash) 1 programinės įrangos versijos

Transporto priemonės duomenys

MarkėPGO
ModelisTIGRA 200
Variklis16->19 14kW
Serijinė galia19 CV / 14 kW
Darbinis tūris200 cc
KurasBenzina aspirato
Transporto priemonės tipasMoto

ECU

GamintojasBOSCH
ModelisMSE6.0
Atmintis / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Galimos derinimo operacijos / parinktys:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Programinės įrangos identifikatoriai (1)

Aparatinės įrangos Nr.Programinės įrangos Nr. (lustas)VersijaAtnaujinimo programinė įrangaECU
X2054A2032 1.88.013F01RB0DD7H BOSCH MSE6.0

ECU pastabos

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata