Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 14 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | PEUGEOT |
| Modelis | 206 |
| Variklis | 1.6L HDI 80kW/109HP EDC16C34 |
| Serijinė galia | 109 CV / 8 kW |
| Darbinis tūris | 1600 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | BOSCH |
| Modelis | EDC16C34 |
| Atmintis / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Galimos derinimo operacijos / parinktys:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- Basic torque management at engine cranking
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Injection in aftertreatment modes 3
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request for high speed - AT
- Driver torque request for low speed - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Take-off torque law in Normal mode
- Variable geometry duty cycle limit in regeneration mode
Programinės įrangos identifikatoriai (14)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | — |
1.67.022 | 1037380085 |
BOSCH EDC16C34 |
| — | — |
1.67.030 | 1037371082 |
BOSCH EDC16C34 |
| — | — |
1.67.024 | 1037374954 |
BOSCH EDC16C34 |
| — | — |
1.67.010 | 1037375531 |
BOSCH EDC16C34 |
| — | — |
1.67.035 | 1037375528 |
BOSCH EDC16C34 |
| — | — |
1.67.020 | 1037386138 |
BOSCH EDC16C34 |
| — | — |
1.67.018 | 1037375530 |
BOSCH EDC16C34 |
| — | — |
1.67.040 | 1037374954 |
BOSCH EDC16C34 |
| — | — |
1.67.042 | 1037375531 |
BOSCH EDC16C34 |
| — | — |
1.67.024 | 1037371084 |
BOSCH EDC16C34 |
| — | — |
1.67.033 | 1037375951 |
BOSCH EDC16C34 |
| — | — |
1.67.035 | 1037371039 |
BOSCH EDC16C34 |
| — | — |
1.67.064 | 1037374955 |
BOSCH EDC16C34 |
| — | — |
1.67.019 | 1037374954 |
BOSCH EDC16C34 |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU pastabos
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Galimi papildomi moduliai
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
