Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
8 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | OPEL / SATURN / VAUXHALL |
| Modelis | MOVANO B |
| Variklis | 2.3L dCi 110kW/148HP SID321 |
| Serijinė galia | 150 CV / 11 kW |
| Darbinis tūris | 2300 cc |
| Kuras | Diesel sovralimentato |
| Transporto priemonės tipas | LCV |
ECU
| Gamintojas | CONTINENTAL-SIEMENS-VDO |
| Modelis | SID321_CONTINENTAL |
| Atmintis / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbite |
Galimos derinimo operacijos / parinktys:
- Boost pressure limiter for diagnostics
- Boost pressure limiter
- Boost pressure
- Boost pressure in aftertreatment modes
- Maximum torque limitation at clutch
- Compressor pressure ratio limit for pumping and speed
- Effective engine torque setpoint for safety
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Max torque correction factor for APS sensor
- Max torque correction factor for APS sensor in aftertreatment modes
- Max torque correction factor for soot mass
- Max torque correction factor for soot mass in aftertreatment modes
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor in aftertreatment modes
- Basic torque management at engine cranking
- Injection efficiency
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 3
- L
- Torque limiter
- Torque limiter in full load
- Torque limiter in Eco mode
- Smoke limiter
- Smoke limiter in aftertreatment modes
- RPM Limiter
- RPM limiter - AT
- RPM limit for ECT sensor
- Maximum absolute effective torque
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Max force table for force to powertrain setpoint conversion
- Specific injection pressure limiter
- Specific injection pressure limiter in aftertreatment modes
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Air mass flow
- Driver torque request
- Driver torque request Dynamic mode
- Torque value tolerance between level 1 and level 2
- Torque value tolerance between level 1 and level 2 - AT
- Torque limiter for the APS/BPS in aftertreatment modes
- Torque limiter in aftertreatment modes
- Torque limiter in aftertreatment modes 2
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion 2
- Torque model - fuel quantity to torque conversion in aftertreatment modes
- Torque model - torque to fuel quantity conversion
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
Programinės įrangos identifikatoriai (8)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
|---|
| — | 237017698S |
1.83.009 | 237618431S |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237011330V |
1.83.011 | 237611339V |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237010374V |
1.83.010 | 237610381V |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237010374V |
1.83.017 | 237610384V |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237018559S |
1.83.010 | 237618809S |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237019422S |
1.83.001 | 237619431S |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237011330V |
1.83.018 | 237611340V |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
| — | 237017698S |
1.83.010 | 237617700S |
CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL |
Techninės pastabos apie automobilį
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU located in the engine bay on the driver'side. Difficulty: easy.
ECU pastabos
Microprocessor TC297TP_128 This Setting File can be used for serial system NewGenius.
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU
