Raskite programinės įrangos identifikatorius (aparatinės, programinės įrangos ir atnaujinimo numerius), galimas derinimo parinktis ir kaip gauti originalų arba perprogramuotą failą.
✓ Derinimas failu (flash)
✓ Galimas papildomas modulis 4 programinės įrangos versijos
Transporto priemonės duomenys
| Markė | OPEL / SATURN / VAUXHALL |
| Modelis | INSIGNIA A |
| Variklis | 2.0L 16V TURBO 162kW/217HP DELCO E39 |
| Serijinė galia | 220 CV / 162 kW |
| Darbinis tūris | 2000 cc |
| Kuras | Benzina sovralimentato |
| Transporto priemonės tipas | Auto |
ECU
| Gamintojas | DELCO |
| Modelis | E39/E39A |
| Atmintis / EPROM | MICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000 |
Galimos derinimo operacijos / parinktys:
- Engine ignition timing versus temperature
- Advance at idle speed
- Lambda/AFR full load/WOT
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Requested spark advance - high octane
- Requested spark advance - low octane
- Boost pressure
- Desired engine load calculation
- Variable exhaust camshaft timing 2
- Variable exhaust camshaft timing
- ECT for fan engagement
- Engine idle
- Engine idle in Park position
- Variable intake camshaft timing 2
- Variable intake camshaft timing
- Torque limiter 2
- Torque limiter
- Lambda enrichment - open loop
- RPM Limiter
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Throttle angle management
- WG duty cycle vs RPM and boost
Programinės įrangos identifikatoriai (4)
| Aparatinės įrangos Nr. | Programinės įrangos Nr. (lustas) | Versija | Atnaujinimo programinė įranga | ECU |
| 12639706 | 12643377 |
1.91.008 | 12646159 |
DELCO E39/E39A |
| 12653997 | 12666077 |
1.91.009 | 12658595 |
DELCO E39/E39A |
| 12653997 | 12650084 |
1.91.017 | 12650159 |
DELCO E39/E39A |
| 12653997 | 12655860 |
1.91.009 | 12646837 |
DELCO E39/E39A |
Techninės pastabos apie automobilį
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU pastabos
Microprocessor FMPC 5566 This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Gaukite failą šiai transporto priemonei
Tools to read and write this ECU